First-time poster here, don’t bully me, apologies for the potentially atrocious formatting :) TL;DR at the end
So in the wake of Bitcoin’s explosive rise in value and media attention, I’ve been encouraged by others to share my experience over the past few years as a miner. Here's my story (it's kinda long, you've been warned)
It all started almost three years ago in the beginning of 2015 when Bitcoin flew under my radar. Looking into it, I admittedly wasn’t drawn in because of the decentralisation or the anonymous payments, I was hooked on the idea that anyone could get their hands on some just by running a program and leaving it to do its own thing. I know, how shallow of me. But the idea of making even a bit of money without ‘any work’ was convincing enough for 11-year-old me to do more digging into the matter.
To my disappointment, I soon found out that the era of mining Bitcoins with a PC’s CPU or GPU was long obsolete and instead it was all ASICs at that point.
So that summer, for my twelfth birthday, I got a little ASIC machine for €60, an Antminer U3
. This little thing took up less space than a graphics card but could mine at 60 GH/s. Because, at the time, I didn’t have a controller device that could be kept up and running all day long so it could run the program that mined Bitcoin using the U3, I went ahead and got a Raspberry Pi. After setting up the Pi and installing all the necessary stuff (took an awfully long time), I connected it to AntPool and plugged the U3 in. Two days past and the mining pool sent the first Bitcoin I ever received to my wallet (I was using Blockchain.info). It was just 30 cents worth of BTC but I felt a bit of a rush because I was earning a bit of money through this completely new thing and the idea of that was thrilling.
Let’s back up for a second. I just used the term ‘earning’ as if I was profiting, and naive me 2 years ago was no different. In reality, I was at first oblivious to the fact that I was most likely LOSING money overall because of how much energy that little sucker was taking in. But, I was comforted thinking that using that machine was just a practical way of learning about this modern currency and that the loss of several cents’ worth of energy was acceptable in the name of education and learning.
Fast forward ten months to the wonderful summer of 2016. I had recently turned 13 and the Antminer U3 had been running on and off throughout. Various pauses and breaks in mining would be observed, as I had to manually get everything up and running after frequent breaks in the Internet connection. You’d expect my newly-turned-teenage brain to lose interest in Bitcoin as it does with many other gimmicks, but – even surprising myself – I miraculously didn’t. Good thing I maintained interest thinking about it now, not so good at the time for my parents. Why do I say this? I felt like it was time to get a little upgrade in my hardware.
Getting an upgrade
Days passed with me comparing every ASIC miner I could at that price point. It was then I set my eyes upon the Antminer S7 (same folks who did my U3, nice). I had put it up against a plethora of other miners and I figured the S7 was my best bet; the thing costs only about 10 times that of my U3 but could run at 4.73 TH/s, almost 80 times as powerful. The only problem being its power consumption was at 1300 watts, which would put a massive dent in the electricity bill and eliminate any profit I would make. Fortunately, I had a secret weapon up my sleeve – or rather my mum did. She had rented out an office outside our apartment where she would keep files and paperwork. The office’s electricity bill was a flat rate as far as I’m aware and it ended up being my saving grace because it virtually got rid of the “oh no I’m actually going to be losing money because of how much electricity I’m eating up” factor, making this whole hardware upgrade viable.
After convincing my parents, they finally agreed to shell out the requested amount, with the initial investment being paid back with time. I went to a local Bitcoin vendor and purchased 1 BTC for about $665 in cash (sigh
yes, I know. $665 dollars). Shortly after, I used about 0.9 BTC to purchase the Antminer S7 and a 1600W power supply for a grand total of $600. The products would be made and shipped from China so I was definitely in for a wait.
A month passes and the package arrives at last. I connected all the wires from the power supply into the S7 and – with great anticipation – I plugged it into the wall to start its first ever run. And what do you know? An extremely loud and high-pitched whirring sound blasted out from the fans on both the power supply as well as the S7. After killing the thing, I questioned my choices. I couldn’t dare put that thing anywhere near my mum’s office in the event it drive everyone in the building absolutely nuts. I was at a loss. However, I soon recovered from my temporarily debilitated state and got working on a solution.
The first idea that came to my mind: change the fans. The stocks fans were by Evercool and spun at around 3000 RPM. The power supply used a small, robust fan that looked like a cube that must’ve spun at extremely high speeds judging by how high the sound it produced was. I got my parents to give me some more funding so I could acquire the replacement fans and I did. Bust. After installation and testing, none of the fans would work. I managed to configure the S7 to connect to my Antpool account and the machine would manage mining for several minutes running at peak performance but ultimately be automatically cut off because of how hot the machine was getting (I’m talking about 80 degrees Celsius kinda hot in that thing). The fans got refunded and I was back to the drawing board.
After combing through some forum posts and videos, I came across this
video and a forum post in which people have their mining rigs placed inside a ventilated, muffled cabinet. Undertaking a project like this would be time-consuming and risky but I had no better ideas so I decided to go through with the idea anyway.
Firstly, I sought out a cabinet with suitable dimensions. I managed to get just what I needed at a second-hand IKEA shop. Great. Secondly, I went ahead and acquired some sound-absorbing acoustic foam from a local provider. Fantastic. Finally I had to get a ventilation system going within the cabinet, otherwise, all the hot air would roast the machine alive in there in a bloody mess. With the help of my dad, we found a pair cabinet fans on the Internet that were close to silent but could circulate the air well enough.
Eventually, all the materials came and, with the help of my parents, put everything together. The process took quite long time and we had a couple hiccups along the way, but we got it done and it came out pretty nice.
The moment of truth came and, to my relief, it ran so much quieter than without the cabinet. It was nowhere near silent but it reduced the noise a great deal. Soon after, I got the thing into the office and set everything up from there. Unfortunately, I was forced to underclock it because you could still hear the machine’s whining from outside the thin office door. Gunning the hashrate down about 25% to 3.7TH/s, I could lower the fan speed without risking the machine burning up. Sure, I wasn’t getting the full potential of the machine but I didn’t complain because electricity was not an issue there and it was still a whole lot better than my U3. With it up and running, I could leave it there, periodically checking to see if it was mining on Antpool.
In the months that followed, I was getting a solid $2.5 worth of BTC on daily basis. Half a year later, May of 2017, I had accumulated a satisfactory $600. I thought, “At this rate, I’d be able to pay my parents’ investment back in a few months” (the total investment came close to $900). Bitcoin had risen to over $1500 so I was already over the moon at that point because of how well everything was going. Little did I know…
I hit 0.5 BTC midway through September this year. The price of BTC had dropped after a sudden rise to $5000, but I couldn’t have asked for more. Although I possessed only half the amount of BTC I paid for the machine, its value was over twice that of the initial investment. I thought BTC would level off at around $4000 but nope.
In the month of October, the price skyrocketed. Since September, I had only mined 0.017 BTC but the value was already over $3000. It was just a matter of selling it, but I decided to hodl. Good thing I did.
As of November 5, I have approximately 0.52 BTC mined in total from my S7, valued at $4000. If I were to sell it right now, I’d have a profit of over $3100. And as for my miner, it’s churning out 0.0006 BTC daily, sounds like nothing but it’s still the equivalent of $5 today and I couldn’t be happier, at least with the miner and Bitcoin.
You remember that $665 for 1 BTC that I mentioned earlier? In hindsight, it would’ve been such a better idea to just keep that one Bitcoin and not do anything with it until today (in the interest of making much more money), as I’d theoretically have upwards of $7000. The idea of that still haunts me sometimes if I dwell on it too long but knowing that I’m in possession of an already hefty amount, the pain of it had numbed slightly. It’s not all doom and gloom for me from the exponential increase in Bitcoin’s value, however. Those first $0.3 payments from my humble little U3 all those years ago now are now the equivalent of over $6 today!
Bitcoin and everything it encompasses has been and still is a journey of discovery and an adventure. Looking back, starting with a modest €60 Antminer U3 to having a sum of Bitcoin equivalent to two extremely high-end gaming rigs (first thing I could think of as a comparison, sorry) has been something I can’t really describe. Through the course of the past few years, I’ve learned more about technology, I’ve unexpectedly gotten insight into economics and business and – of course – I’ve made a lot of money (if I decide to stop hodling that is).
Also, props to my parents for keeping an open mind throughout, I know some parents would be horrified at their kids being involved in something that has been used in some less-than-savoury ways and it's great knowing mine have been supportive all the way.
TL;DR got into Bitcoin mining 3 years ago at age 11 with an Antminer U3 that ran at 60 GH/s, got an Antminer S7 (4.73TH/s) and built a sound-muffling, ventilated cabinet for it. Am sat here today with $3000 profit if I decide to sell right now.
When it comes to Bitcoin (BTC) mining, the major questions on people’s minds are “how profitable is Bitcoin mining” and “how long would it take to mine one Bitcoin?” To answer these questions, we need to take an in-depth look at the current state of the Bitcoin mining industry — and how it has changed — over the last several years.
Bitcoin mining is, essentially, the process of participating in Bitcoin’s underlying security mechanism — known as proof-of-work — to help secure the Bitcoin blockchain. In return, participants receive compensation in bitcoins (BTC).
When you participate in Bitcoin mining, you are essentially searching for blocks by crunching complex cryptographic challenges using your mining hardware. Once a block is discovered, new transactions are recorded and verified within the block and the block discoverer receives the block rewards — currently set at 12.5 BTC — as well as the transactions fees for the transactions included within the block.
Once the maximum supply of 21 million Bitcoins has been mined, no further Bitcoins will ever come into existence. This property makes Bitcoin deflationary, something which many argue will inevitably increase the value of each Bitcoin unit as it becomes more scarce due to increased global adoption.
The limited supply of Bitcoin is also one of the reasons why Bitcoin mining has become so popular. In previous years, Bitcoin mining proved to be a lucrative investment option — netting miners with several fold returns on their investment with relatively little effort.
bitcoin mining hardware
The mining hardware you choose will mostly depend on your circumstances — in terms of budget, location and electricity costs. Since the amount of hashing power you can dedicate to the mining process is directly correlated with how much Bitcoin you will mine per day, it is wise to ensure your hardware is still competitive in 2019.
Bitcoin uses SHA256 as its mining algorithm. Because of this, only hardware compatible with this algorithm can be used to mine Bitcoin. Although it is technically possible to mine Bitcoin on your current computer hardware — using your CPU or GPU — this will almost certainly not generate a positive return on your investment and you may end up damaging your device.
The most cost-effective way to mine Bitcoin in 2019 is using application-specific integrated circuit (ASIC) mining hardware. These are specially-designed machines that offer much higher performance per watt than typical computers and have been an absolutely essential purchase for anybody looking to get into Bitcoin mining since the first Avalon ASICs were shipped in 2013.
When it comes to selecting Bitcoin mining hardware, there are several main parameters to consider — though the importance of each of these may vary based on personal circumstances and budget.
Performance per Watt
When it comes to Bitcoin mining, performance per watt is a measure of how many gigahashes per watt a machine is capable of and is, hence, a simple measure of its efficiency. Since electricity costs are likely to be one of the largest expenses when mining Bitcoin, it is usually a good idea to ensure that you are getting good performance per watt out of your hardware.
Ideally, your mining hardware would be highly efficient, allowing it to mine Bitcoin with lower energy requirements — though this will need to be balanced with acquisition costs, as often the most efficient hardware is also the most expensive. This means it may take longer to see a return on investment.
In countries with cheap electricity, performance per watt is often less of a concern than acquisition costs and price-performance ratio. In most countries, operating outdated mining hardware is typically cost prohibitive, as energy costs outweigh the income generated by the mining equipment.
However, this may not be the case for those operating in countries with extremely cheap electricity — such as Kuwait and Venezuela — as even older equipment can still be profitable. Similarly, miners with a free energy surplus, such as from wind or solar electric generators, can benefit from the minimal gains offered by still running outdated hardware.
The lifetime of mining hardware also plays a critical role in determining how profitable your mining venture will be. It’s always a good idea to do whatever possible to ensure it runs as smoothly as possible.
Since mining equipment tends to run at a full (or almost full) load for extended periods, they also tend to break down and fail more frequently than most electronics — which can seriously damage your profitability. Equipment failure is even more common when purchasing second-hand equipment. Since warranty claims are often challenging, it can often take a long time to receive a warranty replacement.
In many cases, one of the major criteria used to select mining hardware is the price-performance ratio — a measure of how much performance a machine outputs per unit price. In the case of cryptocurrency mining hardware, this is commonly expressed as gigahashes per dollar or GH/$.
Under ideal circumstances, the mining hardware would have a high price-performance ratio, ensuring you get a lot of bang for your buck. However, this must also be considered in combination with the acquisition costs and the expected lifetime of the machine — since the absolute most powerful machines are not always the cheapest or the most energy efficient.
Acquisition costs are almost always the biggest barrier to entry for most Bitcoin miners since most top-end mining hardware costs several thousand dollars. This problem is further compounded by the fact that many hardware manufacturers offer discounts for bulk purchases, allowing those with deeper pockets to achieve a better price-performance ratio.
Acquisition costs include all the costs involved in purchasing any mining equipment, including hardware costs, shipping costs, import duties, and any further costs. For example, many ASIC miners do not include a power supply — which can be another considerable expense, since the 1,000W+ power supplies usually required tend to cost several hundred dollars alone.
Ensuring your equipment runs smoothly can also add in additional costs, such as cooling and maintenance expenses. In addition, some miners may want to invest in uninterruptible power supplies to ensure their hardware keeps running — even if the power fails temporarily.
Current Generation Hardware
One of the most recent additions to the Bitcoin mining hardware market is the Ebang Ebit E11++, which was released in October 2018. Using a 10nm fabrication process for its processors, the Ebit E11++ is able to achieve one of the highest hash rates on the market at 44TH/s.
In terms of efficiency, the Ebang Ebit E11++ is arguably the best on the market, offering 44TH/s of hash rate while drawing just 1,980W of power, offering 22.2GH/W performance. However, as of writing, the Ebang Ebit E11++ is out of stock until March 31, 2019 — while its price of $2,024 (excluding shipping) may make it prohibitively expensive for those first getting involved with Bitcoin mining.
Another popular choice is the ASICminer 8 Nano, a machine released in October 2018 that offers 44TH/s for $3,900 excluding shipping. The ASICminer 8 Nano draws 2,100W of power, giving it an efficiency of almost 21GH/W — slightly lower than the Ebit E11++ while costing almost double the price. However, unlike the E11++, the 8 Nano is actually in stock and available to purchase.
ASICminer also offers the 8 Nano Pro, a machine launched in mid-2018 that offers 80 TH/s of hash rate for $9,500 (excluding shipping). However, unlike the Ebit E11++ and 8 Nano, the minimum order quantity for the 8 Nano Pro is curiously set at five, meaning you will need to lay out a minimum of $47,500 in order to actually get your hands on one (or five).
While the 8 Nano Pro doesn’t offer the same performance per watt as the Ebit E11+ or AICMiner 8 Nano, it is one of the quieter miners on this list, making it more suitable for a home or office environment. That being said, the ASICminer 8 Nano Pro is easily the most expensive miner per TH on this list — costing a whopping $118.75/TH, compared to the $46/TH offered by the E11++ and $88.64 offered by the 8 Nano.
The latest hardware on this list is the Innosilicon T3 43T, which is currently available for pre-order at $2,279, and estimated to ship in March 2019. Offering 43TH/s of performance at 2,100W, the T3 43T comes in at an efficiency of 20.4GH/W, which is around 10 percent less energy efficient than the Ebit E11++.
The T3 43T also has a minimum order quantity of three units, making the minimum acquisition cost $6837 + shipping for preorders. All in all, the T3 43T is more costly and less efficient than the E11++ but may arrive slightly earlier since Ebang will not ship the E11++ units until at least end March 29, 2019.
Finally, this list would not be complete without including Bitmain’s latest offering, the Antminer S15-28TH/s, which — as its name suggests — offers 28TH/s of hash power while drawing just under 1600W at the wall. The Antminer S15 is one of the only SHA256 miners to use 7nm processors, making it somewhat smaller than some of the other devices on this list.
Like most pieces of top-end Bitcoin mining hardware, the Antminer S15 27TH/s model is currently sold out, with current orders not shipping until mid-February 2019. However, the S15 is offered at a significantly lower price than many of its competitors at just $1020 (excluding shipping), with no minimum quantity restriction. At these rates, the Antminer comes in at just $37.78/TH — though its energy efficiency is a much less impressive 17.5GH/W.
Mining Hardware Mining Hardware Comparison
Performance (GH/W) Price Performance Ratio ($/TH)
Ebang Ebit E11++ 22.2GH/W $46/TH
ASICminer 8 Nano 21GH/W $88.64/TH
ASICminer 8 Nano Pro 19GH/W $118.75/TH
Innosilicon T3 43T 20.4GH/W $53/TH
Antminer S15-28TH/s 17.5GH/W $37.78/TH
How To Select a Good Mining Pool
Mining pools are platforms that allow miners to pool their resources together to achieve a higher collective hash rate — which, in turn, allows the collective to mine more blocks than they would be able to achieve alone.
Typically, these mining pools will distribute block rewards to contributing miners based on the proportion of the hash rate they supply. If a pool contributing a total of 20 TH/s of hash rate successfully mines the next block, a user responsible for 10 percent of this hash rate will receive 10 percent of the 12.5 BTC reward.
Pools essentially allow smaller miners to compete with large private mining organizations by ensuring that the collective hash rate is high enough to successfully mine blocks on regular basis. Without operating through a mining pool, many miners would be unlikely to discover any blocks at all — due to only contributing a tiny fraction of the overall Bitcoin hash rate.
While it is quite possible to be successful mining without a pool, this typically requires an extremely large mining operation and is usually not recommended — unless you have enough hash rate to mine blocks on a regular basis.
Although it is technically possible to discover blocks mining solo and keep the entire 12.5 BTC reward for yourself, the odds of this actually occurring are practically zero — making pool collaboration practically the only way to compete in 2019 and beyond.
Selecting the best pool for you can be a challenging job since the vast majority of pools are quite similar and offer similar features and comparable fees. Because of this, we have broken down the qualities you should be looking for in a new pool into four categories; reputation, hash rate, pool fees, and usability/features:
The reputation of a pool is one of the most important factors in selecting the pool that is best for you. Well-reputed pools will tend to be much larger than newer or less well-established pools since few pools with a poor reputation can stand the test of time.
Well-reputed pools also tend to be more transparent about their operation, many of which provide tools to ensure that each user is getting the correct reward based on the hash rate contributed. By using only pools with a great reputation, you also ensure your hash rate is not being used for nefarious purposes — such as powering a 51 percent attack.
When comparing a list of pools that appear suitable for you, it is a wise move to read their user reviews before making your choice — ensuring you don’t end up mining at a pool that steals your hard-fought earnings.
When it comes to mining Bitcoin, the probability of discovering the next block is directly related to the amount of hashing power you contribute to the network. Because of this, one of the major features you should be considering when selecting your pool is its total hash rate — which is often closely related to the proportion of new blocks mined by the pool
Since the total hash rate of a pool is directly related to how quickly it discovers new blocks, this means the largest pools tend to discover a relative majority of blocks — leading to more regular rewards. However, the very largest pools also tend the have higher fees but often make up for this with sheer success and additional features.
Sometimes, some of the largest pools have a minimum hash rate requirement ù leaving some of the smaller miners left out of the loop. Although smaller pools typically have more relaxed requirements with reduced performance thresholds, these pools may be only slightly more profitable than mining solo.
When choosing a suitable pool, typically one of the major considerations is its fees. Typically, most pools will charge a small fee that is deducted from your earnings and is usually around 1-2 percent — but sometimes slightly lower or higher.
There are also pools that offer 0 percent fees. However, these are often much smaller than the major pools and tend to make their money in a different way — such as through monthly subscriptions or donations.
Ideally, you will choose the pool that offers the best balance of fees to other features. Usually, the pool with the absolute lowest fees is not the best choice. Additionally, pools with the lowest fees often have the highest withdrawal minimums — making pool hopping uneconomical for most.
Usability and Features
When first starting out with Bitcoin mining, learning how to set up a pool and navigating through the settings can be a challenge. Because of this, several pools target their services to newer users by offering a simple to navigate user interface and providing detailed learning resources and prompt customer support.
However, for more experienced miners, simple pools don’t tend to offer a variety of features needed to maximize profitability. For example, although many mining pools focus their entire hash rate towards mining a single cryptocurrency, some are large enough to offer additional options — allowing users to mine other SHA256 coins such as Bitcoin Cash (BCH) or Fantom if they choose.
These pools are technically more challenging to use and mostly designed for those familiar with mining, happy to hop from coin to coin mining whichever is most profitable at the time. There are even some exchanges that automatically direct their combined hash rate at the most profitable cryptocurrency — taking the guesswork out of the equation.
bitcoin mining pool
Best Mining Pools for 2019
The Bitcoin mining pool industry has a large number of players, but the vast majority of the Bitcoin hash rate is concentrated within just a few pools. Currently, there are dozens of suitable pools to choose from — but we have selected just a few of the best to help get you started on your journey.
Slushpool was the first Bitcoin mining pool released, being launched way back in 2010 under the name “Bitcoin Pooled Mining Server.” Since then, Slushpool has grown into one of the most popular pools around — currently accounting for just under 10 percent of the total Bitcoin hash rate.
Although Slushpool isn’t one of the very largest pools, it does offer a newbie-friendly interface alongside more advanced features for those that need them. The pool has moderately high fees of 2 percent but offers servers in several countries — including the U.S., Europe, China, and Japan — giving it a good balance of fees to features. BTC.com
is another potential candidate for your pool and currently stands as the largest public Bitcoin mining pool. It is responsible for mining around 17 percent of new blocks. Being the largest public mining pool provides users with a sense of security, ensuring blocks are mined regularly and a stable income is made.
Image courtesy of Blockchain.info
is owned by Bitmain, a company that manufacturers mining hardware, and charges a 1.5 percent fees — placing it squarely in the middle-tier in terms of fees. Unlike other platforms, BTC.com
uses its own payment structure known as FPPS (Full Pay Per Share), which means miners also receive a share of the transaction fees included within mined blocks — making it slightly more profitable than standard payment per share (PPS) pools.
Another great option is Antpool, a mining pool that supports mining services for 10 different cryptocurrencies, including Bitcoin, Litecoin (LTC) and Ethereum (ETH). AntPool frequently trades places with BTC.com
as the largest Bitcoin mining pool. However, as of this writing, it occupies the title of the third-largest public mining pool.
What sets Antpool apart from other pools is the ability to choose your own fee system — including PPS, PPS+, and PPLNS. If you choose PPLNS, using Antpool is free but you will not receive any transaction fees from any blocks mined. Antpool also offers regular payouts and has a low minimum payout of just 0.001 BTC, making it suitable for smaller miners.
Last on the list of the best Bitcoin mining pools in 2019 is the Bitcoin.com
mining pool. Although this is one of the smaller pools available, the Bitcoin.com
pool has some redeeming features that make it worth a look. It offers mining contracts, allowing you to test out Bitcoin mining before investing in mining equipment of your own. According to Bitcoin.com, they are the highest paying Pay Per Share (PPS) pool in the world, offering up to 98 percent block rewards as well as automatic switching between BTC and BCH mining to optimize profitability.
While your mining hardware is most important when it comes to how much BTC you can earn when mining, your electricity costs are usually the largest additional expense. With electricity costs often varying dramatically between countries, ensuring you are on the best cost-per-KWh plan available will help to keep costs down when mining.
Most commonly, large mining operations will be set up in countries where electricity costs are the lowest — such as Iceland, India, and Ukraine. Since China has one of the lowest energy costs in the world, it was previously the epicenter of Bitcoin mining. However, since the government began cracking down on cryptocurrencies, it has largely fallen out of favor with miners.
Technically, Venezuela is one of the cheapest countries in the world in terms of electricity, with the government heavily subsidizing these energy costs — while Bitcoin offers an escape from the hyperinflation suffered by the Venezuelan bolivar. Despite this, importing mining hardware into the country is a costly endeavor, making it impractical for many people.
Finding ways to lower your electricity costs is one of the best ways to improve your mining profitability. This can include investing in renewable energy sources such as solar, geothermal, or wind — which can yield increased profitability over the long term.
if you are looking to buy bitcoin mining equipment here is some links:
Model Antminer S17 Pro (56Th) from Bitmain mining SHA-256 algorithm with a maximum hashrate of 56Th/s for a power consumption of 2385W. https://miningwholesale.eu/product/bitmain-antminer-s17-pro-56th-copy/?wpam_id=17
Model Antminer S9K from Bitmain mining SHA-256 algorithm with a maximum hashrate of 14Th/s for a power consumption of 1323W. https://miningwholesale.eu/product/bitmain-antminer-s9k-14-th-s/?wpam_id=17
Model T2T 30Tfrom Innosilicon mining SHA-256 algorithm with a maximum hashrate of 30Th/s for a power consumption of 2200W. https://miningwholesale.eu/product/innosilicon-t2t-30t/?wpam_id=17
mining wholesale website: https://miningwholesale.eu/?wpam_id=17
The Argument Against Proof of Stake (PoS) by Michael Stollaire
Recently, I’ve been interviewed several times, and it’s an eventuality that the topic of how Verge stacks up against the competition in the privacy coin space comes up. The first thing I consider is the method of mining. In short, if Proof of Stake (PoS) is leveraged, that’s it for me. That asset is compromised, and most of Verge’s competition is PoS. I actually had a representative from one of Verge’s competitors tell me that PoS “is the future.” My response was that I was afraid of what the future held. Here’s why I consider PoS the death toll for a cryptocurrency: PoS uses a form of Dash’s Master Node concept. Someone has to have One-thousand (1,000) Dash coins that they “stake” by essentially putting it into a deposit box of sorts. If at any time, the deposit box does not have 1,000 coins in it, the Dash system detects this fact, and your Master Node is disabled. Well, this is a good situation if you were one of the first people involved in any PoS cryptocurrency, when coins cost $1 or less at the time or you were one of the original miners. However, what if you were not an ultra-early adopter? You are in deep trouble. Keeping with our Dash example, the current price for Dash is just over $300, so let’s use that round number in our calculations. One-thousand (1,000) Dash coins at $300 each would be $300,000. That’s right. You can have your very own Dash Master Node for the bargain price of… wait a second. The average price of a house in America is cheaper. Who can afford that?! I’ll tell you who. The one-percenters and the financial establishments that cryptocurrency was invented in January 2009 to thwart. That’s right, just like there are activist investors that buy up 10-25% of a public company’s stock so they can leverage their… you guessed it… STAKE… against the company itself, in order to control who the CEO is, who sits on the board of directors, and the general direction and activities of a company, the rich of the world can basically perform a hostile takeover of any cryptocurrency that leverages PoS for mining purposes. Here’s an example, Warren Buffett, who’s current net worth is $80.3 Billion. There are currently 4,719 Dash Master Nodes online. As we said before the approximate cost of a Dash Master Node is $300,000 each, so let’s have some math fun, shall we? $300,000 X 5,000 = $1.5 Billion. So, Mr. Buffett wakes up one day, and decides that cryptocurrency should play a minor part in his investment portfolio, and he plunks down $1.5 Billion to take over Dash. Since Verge’s other competitors that leverage PoS for mining cost significantly less, it’s that much easier for Mr. Buffett… or any wealthy individual to compromise any of them. Therefore, I would never consider investing in a PoS coin. So, we are now down to three (3) Proof of Work (PoW) assets: Verge, Monero and Bitcoin. Bitcoin is out, because of two reasons. Some might say that the hostile takeover of Bitcoin already took place, as China controls so much of Bitcoin’s PoW hash rate. Please reference the pie chart below. Bitmain’s AntPool is 22.3% of Bitcoin’s total hash rate by itself. https://blockchain.info/pools
Also, since Bitcoin is “sort of anonymous” it cannot stack up against Verge, which is a true privacy cryptocurrency that has features now - and in the future… - that will make it the premier asset in this area. Again, in my opinion. Verge also leverages several different PoW mining algorithms to make sure that the chances are slim to none that a hash rate monopoly can take place. Transactions are faster by far, and transactions per second are twenty (20) times that of Bitcoin. The mobility feature of Verge are also secure and private, and… well, that’s it. I don’t really have to go any further, because we can logically deduce that Verge is superior to Bitcoin in several ways. Therefore, only Monero, ZCash and Verge are left. There has been several deep-dives done on Monero, as far as due diligence of their privacy and security features are concerned that bring up valid points about the lack of Monero’s privacy: http://hackingdistributed.com/2017/04/19/monero-linkability
After the implementation of the much-anticipated Wraith Protocol™, most would agree that Verge is on equal-footing with Monero, regarding privacy and security features, if not slightly better, and Verge is just getting started. There’s much more to come in the near and distant future, I assure you. However, back to Monero. Another key element of an asset is whether or not it is an inflationary or deflationary currency. Bitcoin has a limit on the sheer number of coins minted, for instance, and so does Verge. They are deflationary currencies that will hold or increase their value over time. But, Monero (and PIVX) has an unlimited supply, just like fiat currencies such as the US Dollar. That means as time goes on, more and more Monero coins will be minted and its value will decrease. Right there, it’s game over, at least for me. However, I do have to point out that Verge has Toi2P “baked in” and this means that both sender and receiver IP addresses are obfuscated. Does Monero do that? No, it does not. On to ZCash. Well, it’s got its fair share of issues. Over six-hundred, it seems: https://github.com/zcash/zcash/issues
However, the main issue for me is that they basically had an ICO, just like NAV and PIVX, etc. If you don’t have an issue with 20% or more of the entire supply of an asset going to line the pockets of its initial investors and team, you certainly should. Here’s how one blogger on Steemit put it: “The ZCash team decided to launch ZCash as an altcoin so they were able to fund the development: ZCash has a US-based company behind it and will tax 20% of the mining revenue during the first 4 years to pay off private investors. If ZCash were to succeed, the private investors will benefit greatly from the launch of this cryptocurrency. Although I don't like ICO's, a public coinsale (a form of crowdfunding) would have been a more fair and open way to fund development than seeking money from private investors.” Also… “Another problem with ZCash is the fact that it's brand new cryptography. Nobody can really guarantee that there aren't some bugs in the system that will make it possible to deanonymize transactions or create coins out of thin air. What's more, if coins are being created, it will not even be detectable because, unlike Monero (and Verge), you can't verify the total amount of coins in the ZCash blockchain.” Verge had no pre-mine. Verge had no ICO. The entire Verge Team is composed of pro-bono volunteers, including yours truly. That’s right. We work for free. Why? Because that’s how much sheer belief we have in Verge and we don’t have a “golden parachute” end game like those involved with ZCash. Does ZCash have a multi-algorithm mining methodology to prevent the platform being controlled by a few centralized GPU-based mining farms? No it does not. They can be taken over, just like Bitcoin. Now, there is only one coin standing: Verge. by Michael Stollaire October 31, 2017
Antpool holds roughly 15% of the total hash rate of all Bitcoin mining pools. About Antpool. Antpool mined its first block in March 2014, meaning that it emerged roughly four years after the first mining pool; Slushpool. Antpool is run by Bitmain Technologies Ltd., the world’s largest Bitcoin mining hardware manufacturer, and a large portion of their pool is run on Bitmain’s own mining ... Cointelegraph Bitcoin’s slow transaction processing is a result of Antpool mining empty blocks, sources are suggesting. Bitcoin (BTC) transaction delays and fees are increasingly […] Antpool Starts Bitcoin Classic Beta Trial It was only a matter of time until the Bitcoin Classic proposal started showing what it is all about, and a beta version of the client has been released. The main goal of this proposal is to increase the Bitcoin block size to 2MB, but use a hard fork to do so. Please complete the following verification. Antminer; Artificial Intelligence; Antpool; BTC.com; Support; My Account AntPool run by Bitmain Tech Ltd. You can use it to mine BTC/BCH, LTC, ETH, ETC, DASH, ZCASH, SC, XMC and BTM. It has no BTC mining fee for PPLNS but the pool gets to keep all the transaction fees from the block. The coinbase signature for this pool is: "Mined by AntPool".
This video explains how to set what type of coin to mine at antpool and how to set the appropriate wallet. Our partner: https://www.cloudtokenwallet.com/ Registration code: 5516709372 Info partners: bitcoingarden.tk, coinidol.com The hard fork of bitcoin is inevit... This tutorial will demonstrate how to mine bitcoin with antminer on bitmain antpool and setup a worker. #antpool #miningpool #cryptomining #mining #bitmain Хардфорк биткоина неизбежен. Новостной портал Bloomberg сообщает, что крупнейший майнинговый пул Антпул(Antpool ... This video is unavailable. Watch Queue Queue. Watch Queue Queue