Hashrates and earnings for cryptocurrency coin mining

GameMax GM-1650 1650W 80 Plus Gold Power Supply with 14cm Fan - Black £85.80 at Amazon

The description of this deal was not provided by this subreddit and it's contributors.
£85.80 - CCLOnline
Product Description
Game Max 12V ATX 1650w power SUPPLY used for bitcoin mining and ethereum ETH mining 8 GPU. A channel independent + 12V Output, power factor up to 1650w 80 Plus Gold high conversion efficiency, The typical load efficiency up to 90%. A large 140mm fan structure, intelligent temperature control, large air volume, ultra mute function mature APFC + and double forward technology, the most green and environmentally friendly power source: high power, high efficiency and full RoHS craft radiation. The applicability of the strongest power: full power input, support multiple high-power quad-core CPU's, support for 6 graphics card, high-performance motherboard graphics cards and other devices.
key features
efficiency exceed 88% at 220V (Gold 90% Designed basis)
thermal control technology
protection circuitry offer: OVP/ OPP/ SCP/ OCP/ UVP/ otp
100% burn-in under ambient temperature up to 45 degrees
100% high voltage test under AC 1.5Kv 10mA 3 seconds
standby power Less than 1W, low power consumption ripple and silent.
Troubleshooting steps:
  1. Please make sure that you once you have connected the mains power cable, that you switch the manual power button to 1 from 0 located next to the power input.
  2. Make sure the 4+4 Pin 12V connection is plugged into either the 4-PIN or 8-PIN CPU Power Input on your motherboard, in addition to the main 20+4 Pin Connector. This will be 4-Pin or 8-Pin dependant on your motherboard. Your system will appear not to work without this connected.
  3. Check AC power input. Make sure the cord is firmly seated in the wall socket and in the power supply socket. Try a different cord.
  4. Check DC power connections. Make sure the motherboard and disk drive power connectors are firmly seated and making good contact. Check for loose screws.
  5. Check installed peripherals. Remove all boards and drives and retest the system. If it works, add back in items one at a time until the system fails again. The last item added before the failure returns is likely defective.
    Box Contains
    Power Supply
    Screws
    Features & details
    Efficiency exceed 88% at 220V (Gold 90% designed basis)
    Thermal control technology
    Protection circuitry offer: OVP / OPP / SCP / OCP / UVP / OTP
    100% burn-in under ambient temperature up to 45 degrees
    100% high voltage test under AC 1.5KV 10mA 3 Seconds
    Rate Power : 1536Watt
    Product information GM 1650W
    Brand GameMax
    Product Dimensions 15 x 18 x 8.5 cm; 2.85 Kilograms
    Item model number GM-1650
    Manufacturer Game Max
    Color Black
    Wattage 850 watts
    Are Batteries Included No
    Item Weight 2.85 kg
    Additional Information
    ASIN: B075SK5S5K
    Customer Reviews: 4.4 out of 5 stars 805Reviews
    Best Sellers Rank: 39,664 in Computers & Accessories (See Top 100 in Computers & Accessories)
    321 in Power Supplies
    Date First Available: 19 Sept. 2017
    Warranty & Support
Amazon.com Return Policy: Regardless of your statutory right of withdrawal, you enjoy a 30-day right of return for many products. For exceptions and conditions, see Return details.
This deal can be found at hotukdeals via this link: https://ift.tt/3mpvluJ
submitted by SuperHotUKDeals to HotUKGamingDeals [link] [comments]

Honeyminer

een paar dagen geleden vond ik Honeyminer, het is heel simpel. Honeyminer is een cryptocurrency mining tool die crypto voor je mined. Het kan je grafische kaart of CPU of beide gebruiken. Voor nu kun je alleen satoshi minen (elke 1000 satoshis is 0,10 USD). je kunt jouw potentiële winst voor 24 uur en voor de maand zien op basis van je hash rate.
Het is vrij eenvoudig en het maakt geen gebruik van je netwerk (alleen om je in te loggen zodat het verbinding kan maken met het online dashboard). Nadat je bent begonnen met het minen kun je nog steeds gebruik maken van je computer zoals normaal, maar als je op uw grafische kaart mined wil je misschien Honeyminer uitschakelen, zodat je betere prestaties in game krijgt. je kunt uw satoshi in Bitcoin omzetten en naar een Bitcoin-wallet sturen.
Als je wilt kun je een account aanmaken op Honeyminer en beginnen met minen of je kunt deze link gebruiken: https://honeyminer.com/referred/5qic3 om 1000 satoshi's (0,10USD) gratis te krijgen nadat je je hebt aangemeld. (Natuurlijk is dit niet verplicht :) )
Voor vragen kun je die altijd vragen in de comments, Honeyminer is vrij nieuw en ik ben er ook nieuw in, dus ik zal proberen elke vraag zo goed mogelijk te beantwoorden. Maar ik weet nog niet alles over Honeyminer.

Link naar website https://honeyminer.com/
FAQ https://honeyminer.zendesk.com/hc/en-us/sections/360002220672-General-Questions
submitted by DVVYT to BeermoneyNL [link] [comments]

Honeyminer a Honeygain alternative

So a couple days ago i found Honeyminer, it is very simple and comparable to Honeygain. Honeyminer is a cryptocurrency mining tool that cain mine crypto for you. It can use your graphics card or CPU or both. For now you are mining satoshi (every 1000 satoshis is 0,10 USD). You can see your potential profit for 24hr and for the month based on your hash rate.
It is pretty simple and it does not use your network (only to log you in so it can connect to the online dashboard). After you started mining you can still use your computer like normal but if you are mining on your graphics card you might want to turn off Honeyminer so you can get better performance in game. You can convert your satoshi into Bitcoin and send it to a Bitcoin wallet.
If you want you can create a account on Honeyminer and start earning or you can use this link: https://honeyminer.com/referred/5qic3 to get 1000 satoshis (0,10USD) for free after you sign up.
For qeustions you can always ask me in the comments, Honeyminer is pretty new and I am also new to it so I will try to answer any qeustions as good as I can. But I do not know everything about Honeyminer yet.
Link to website https://honeyminer.com/
FAQ https://honeyminer.zendesk.com/hc/en-us/sections/360002220672-General-Questions
submitted by DVVYT to Honeygain [link] [comments]

PT Super Public Chain has the potential to outperform all mainstream public chains

PT Super Public Chain has the potential to outperform all mainstream public chains
Public chains have become a topic that is widely discussed, and it used to be all about comparing who had the better headlines and everyone was talking about Blockchain 3.0. Their normal method was to take a prominent indicator and make comparisons between them and a mainstream public chain in the market, and then come to a predetermined conclusion. Few articles objectively and comprehensively compare the current mainstream public chains in the market and give the public an intuitive and credible conclusion. Today, we are going to break this bad habit of this industry and make a horizontal comparison of the current mainstream public chains, and thus intuitively and objectively tell you what the differences are between public chains.

https://preview.redd.it/heczp9tj29t51.jpg?width=1772&format=pjpg&auto=webp&s=cbac81221394b3d5294b8c6eb1be52581b0d725f
Contestants:
First generation public chain: BTC (father of blockchain)
Second generation public chain representatives: ETH, EOS
Third generation public chain representatives: polkaDOT, VDS, PT public chain
Criteria for the different generations: classification

  • First generation public chain: mainly referring to the transformation from theory to the implementation of blockchain, Bitcoin is recognized as the representative of the first generation of blockchain.
  • Second generation public chain: the main purpose is to explore the possibility of blockchain applications, among which ETH is the representative. Although EOS claims to be the third-generation public chain, it really should belong to the enhanced version of the second-generation public chain.
  • Third generation public chain is on top of the second generation. It has generally found its niche, and comes with more valuable technical public chains, such as VDS resonance, or polkaDOT’s superb cross chain innovation, PT public chain's full chain compatibility mode and ultra-high throughput.
Four dimensions for comparison:

  • Public chain consensus: the core indicator of public chain innovation, which directly affects the performance and security of the public chain, with a top score of five stars.
Usage scenarios of the public chain: it mainly reflects the commercial value of the public
  • TPS: before upgrading to the 2.0 network, the TPS of ETH can only handle 30 transactions per second, which is considered to be in the weak category, and thus I can only give 1.5 stars.

  • Influence: the representative of the second generation blockchain, giving it 4 stars.
To sum up, the average score of the second-generation public chain ETH is 3.625 stars.
EOS (Second generation public chain):

  • Consensus: OPOS is a new set of consensus created in addition to POW, which perfectly avoids the shortcomings of the POW consensus mechanism. However, its own security has not been recognized by the community. Coupled with the existence of a centralized "referee mechanism", DPOS on the EOS chain has always received mixed reviews in the industry. At this stage, it only deserves a 3-star rating.

  • Usage scenario: thanks to the improvement of the consensus mechanism, EOS has the possibility of being suitable for large-scale applications. There have also been popular applications such as Pixel Wars. However, due to the high rental costs of CPU resources, developers are becoming more and more distant from the EOS ecosystem, and it has been a long time since there have been any popular new applications, so only 2.5 stars.

  • TPS: EOS claimed to have a million concurrency at the beginning of development, but the actual tested volume is 3800 transactions per second at the moment. Compared with the first two public chains, this was a major breakthrough, scoring it 5 stars.

  • Influence: at the beginning when launched, there was a massive wave of interest but then there were no popular applications and the ecosystem has gradually withered away, so influence gets only 2 stars.
To sum up, the average score of the second-generation public chain EOS is 3.125 stars.
polkaDOT (Third generation public chain)

  • Consensus: NPOS is an updated consensus, based on an improved DPOS. The double confirmation mechanism makes it more difficult for nodes to be corrupted, but the cost is higher, so taking into account the utility of the public chain performance, I’ll give it 4 stars.

  • Usage scenarios: polkaDOT provides a cross-chain relay chain mode, and its own positioning is to connect highways without public chains. At present, there is still a lack of real demand in terms of practical scenarios. So far, polkaDOT has been in a tepid state, giving it 3.5 stars.

  • TPS: the processing is 1000 transactions per second on the chain, and taking into account the safety and efficiency, this is a relatively ideal performance, giving an overall score is 4 stars. United States, but at present, based on its budding state, it can only score 2 stars for the time being.
    To sum up, the average score of the third-generation public chain PT is 3.5 stars.
In summary, from the score point of view, the scores of the three generations of public chain are beyond my original expectations. The second-generation public chain is still the preferred platform for mainstream applications, with mature technology, a friendly development environment and low user education costs being the key advantages. However, the third-generation public chain, as a latecomer, generally has a lower score. The technical purposes of the third-generation public chain are very obvious, so there is the phenomenon of partiality. Some of the main functions came close to a full score, while the rest scored relatively low.
https://preview.redd.it/vic3k7j049t51.jpg?width=3334&format=pjpg&auto=webp&s=27a24ce91445d25881d25a8ac8abbbdffbf82a8f
I am very optimistic about the PT public chain. As a latecomer, PT public chain has the first decentralized Dpos+Spos consensus mechanism in the blockchain circle. It has high security, high privacy levels, high efficiency, high capacity expansion, supports compatibility and cross chain technologies, which makes it easier to carry out multi technology development. It also innovates the efficiency of the destruction mechanism of mining coalescence, effectively improving the shortcomings of the traditional mining allocation mechanism, eliminating speculative players, and increasing the participation rate of consensus innovation in the technology and methodology. However, due to the weakness of the latecomers themselves, the ecosystem is in its infancy, and there has not been enough time for all of the innovative mechanisms to be tested by the market, so I can
chain and is an important basis for measuring the commercial prospects of the public chain, with a top score of five stars.
  • TPS of public chain: represents the maximum potential upper limit of the public chain, with top score of five stars.
Influence / achievement of public chain: represents the contribution value of the public chain to the blockchain industry, with a top score of five stars.
These four dimensions mainly consider the practicability of the public chain, and focus on the commercial value itself, as I believe that productivity is the only standard by which to measure technology.
BTC (first generation public chain)

  • Consensus: POW (workload proof mechanism) this is a consensus with the highest degree of security and decentralization so far. The disadvantage is that it is less efficient, because it is the pioneer of POW, so we will give it a great score of 4 stars.

  • Usage scenario: digital currency (payments, transfers, asset management) although BTC is currently the most commonly accepted digital currency, it has a single purpose. We give it a score of 2.5 stars.

  • TPS: it can only process 7 transactions per second, which is also the major factor restricting the popularity of BTC at present. This was a technology compromise in the initial start-up stage, we can only rate it 1.5 stars.

  • Influence: the father of blockchain, the founder of digital currency, it has to be the top score of 5 stars.
To sum up, the average score of the first-generation public chain is 3.25 stars.
ETH (Second generation public chain)

  • Consensus: POW (Proof of Workload) it is the same as bitcoin's consensus mechanism, and its advantages and disadvantages are also basically the same. The difference is that ETH has added an algorithm against mining machines, which makes the computing power more decentralized. In addition, the witness mechanism of DPOS was introduced in the era of ETH2.0, which means I can give a score of 4 stars.

  • Usage scenario: in terms of applications, ETH is invincible. It has the largest user group and developer team in the industry. It has produced popular and even quasi killer applications like Cryptocat, FOMO3D and DEFI, which is the king of blockchain applications. This gives it a full score of five stars.
  • Influence: the influence is limited to a small portion of the technology exploration community, giving it a 2.5-star rating.
To sum up, the average score of the third-generation public chain polkaDOT is 3.5 stars.
VDS (Third generation public chain)

  • Consensus: due to the lack of powerful computing power to support it, the safety and the performance of the public chain have basically not been considered, so, only 1.5 stars can be given.

  • Usage scenario: it has its own resonance mechanism, and it is no exaggeration to say that VDS was the most popular public chain in 2019. It immediately gained explosive popularity in the industry. We have to give credit to this kind of strength, scoring it 4.5 stars.

  • TPS: the official marker is 60,000 transactions per second, but there is no way to evaluate it, and only one star is given.

  • Influence: the once explosive project is now a thing of the past. All of the ecological hot spots have already been extinguished and only one star can be given.
To sum up, the average score of the third-generation public chain VDS is 1.875 stars.
PT Public Chain (Third generation public chain)

  • Consensus: DPOS+SPOS, double consensus. This is the application of the latest blockchain research results, which effectively balances the differing demands of security, efficiency and decentralization. It may become the mainstream in the future. Here I’m giving a high score of 4.5 stars.

  • Usage scenario: built-in cross chain, quantum computer confrontation, and has the first multi-currency aggregate mining mode. At present, PT public chain is the only fair chain in existence with zero pre-mining, zero reservations and zero handling charges. It is a public chain with long-term development potential. The PT public chain has just been put online, and the current ecosystem is still far from perfect, so, only scoring 4 stars.

  • TPS: under the normal condition of the main chain, the processing speed of 4,000 transactions per second is excellent, but the PT public chain also has a hidden power-up mode. Once the fragmentation mechanism is enabled, processing speed of up to 100,000 transactions per second can be achieved, which is quite amazing data. At present, it can only be given 3.5 stars based on the normal state.
Influence: as a public chain, PT has utilized a lot of new technology research, and also has a lot of innovation built into the operations. Recently, it has become popular in Europe and the only give it a low score unfortunately.
However, this score can only be used as a reference based on the specific current environment. Over time, the public chain ecosystem has had its ups and downs, user migration, pop-ups, technology iterations, etc., I still believe that the public chain, with its technical advantages and model innovations, such as PT, can stand out in the market, and time will be the best witness. Just as the PT white paper says, you will slowly get rich together if you make the right choice.
submitted by According_Ticket7936 to u/According_Ticket7936 [link] [comments]

Why i’m bullish on Zilliqa (long read)

Edit: TL;DR added in the comments
 
Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analyzed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk-reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralized and scalable in my opinion.
 
Below I post my analysis of why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
 
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
 
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise, just skim through and once you are zoning out head to the next part.
 
Technology and some more:
 
Introduction
 
The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
 
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
 
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
 
Mainnet is live since the end of January 2019 with daily transaction rates growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralized and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. The maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
 
Zilliqa realized early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralized, secure, and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in the amount of nodes. More nodes = higher transaction throughput and increased decentralization. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
 
Before we continue dissecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
 
Down the rabbit hole
 
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
 
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
 
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour, no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here.
Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
 
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts, etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
 
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as: “A peer-to-peer, append-only datastore that uses consensus to synchronize cryptographically-secure data”.
 
Next, he states that: "blockchains are fundamentally systems for managing valid state transitions”. For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber, and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
 
With public blockchains like Zilliqa, this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network, etc.
 
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
 
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever-changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralized and scalable being low.
 
pBFT stands for practical Byzantine Fault Tolerance and is an optimization on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
 
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and the University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017.
Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
 
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (66%) double-spend attacks become possible.
 
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
 
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT, etc. Another thing we haven’t looked at yet is the amount of decentralization.
 
Decentralisation
 
Currently, there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so-called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralized nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics, you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching its transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand.
Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end-users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
 
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public. They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public-facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
 
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers. The 5% block rewards with an annual yield of 10.03% translate to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non-custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
 
With a high amount of DS; shard nodes and seed nodes becoming more decentralized too, Zilliqa qualifies for the label of decentralized in my opinion.
 
Smart contracts
 
Let me start by saying I’m not a developer and my programming skills are quite limited. So I‘m taking the ELI5 route (maybe 12) but if you are familiar with Javascript, Solidity or specifically OCaml please head straight to Scilla - read the docs to get a good initial grasp of how Zilliqa’s smart contract language Scilla works and if you ask yourself “why another programming language?” check this article. And if you want to play around with some sample contracts in an IDE click here. The faucet can be found here. And more information on architecture, dapp development and API can be found on the Developer Portal.
If you are more into listening and watching: check this recent webinar explaining Zilliqa and Scilla. Link is time-stamped so you’ll start right away with a platform introduction, roadmap 2020 and afterwards a proper Scilla introduction.
 
Generalized: programming languages can be divided into being ‘object-oriented’ or ‘functional’. Here is an ELI5 given by software development academy: * “all programs have two basic components, data – what the program knows – and behavior – what the program can do with that data. So object-oriented programming states that combining data and related behaviors in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behavior are different things and should be separated to ensure their clarity.” *
 
Scilla is on the functional side and shares similarities with OCaml: OCaml is a general-purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
 
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognized by academics and won a so-called Distinguished Artifact Award award at the end of last year.
 
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise, it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts, it inherently involves cryptocurrencies in some form thus value.
 
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa or Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
 
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”. Scilla design story part 1
 
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
 
Scilla also allows for formal verification. Wikipedia to the rescue: In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
 
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
 
Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
 
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
 
Smart contract on a sharded environment and state sharding
 
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
 
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
 
And this is where the downsides of state sharding comes in currently. All shards in Zilliqa have access to the complete state. Yes the state size (0.1 GB at the moment) grows and all of the nodes need to store it but it also means that they don’t need to shop around for information available on other shards. Requiring more communication and adding more complexity. Computer science knowledge and/or developer knowledge required links if you want to dig further: Scilla - language grammar Scilla - Foundations for Verifiable Decentralised Computations on a Blockchain Gas Accounting NUS x Zilliqa: Smart contract language workshop
 
Easier to follow links on programming Scilla https://learnscilla.com/home Ivan on Tech
 
Roadmap / Zilliqa 2.0
 
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
 
Business & Partnerships
 
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organizations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggests that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
 
Zilliqa seems to already take advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, Airbnb, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
 
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
 
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
 
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are built on top of these blocks.
 
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”
 
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human-readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
 
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They don't just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
 
Marketing & Community
 
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data, it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities also seem to be growing.
 
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community-run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non-custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiative (correct me if I’m wrong though). This suggests in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
 
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
 
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real-time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding of what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
 
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures, Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
submitted by haveyouheardaboutit to CryptoCurrency [link] [comments]

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
NewEnglandcoin
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
Milestones
Roadmap
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2019Q2_report/NENG_Security_Decentralization_Value.pdf
Whitepaper v1.0 https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/whitepaper_v1.0/NENG_WhitePaper.pdf
DISCORD https://discord.gg/UPeBwgs
Explorer
http://www.findblocks.com/exploreNENG http://86.100.49.209/exploreNENG http://nengexplorer.mooo.com:3001/
Step by step guide on how to setup an explorer: https://github.com/ShorelineCrypto/nengexplorer
Github https://github.com/ShorelineCrypto/NewEnglandCoin
Wallet
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.5
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.3
MacOS Wallet (10.11 El Capitan or higher): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.2
Android with GNUroot on 32 bits old Phones (alpha release) wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0
Windows wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.3.0.1
addnode ip address for the wallet to sync faster, frequently updated conf file: https://github.com/ShorelineCrypto/cheetah_cpumineblob/mastenewenglandcoin.conf-example
How to Sync Full Node Desktop Wallet https://www.reddit.com/NewEnglandCoin/comments/er6f0q/how_to_sync_full_node_desktop_wallet/
TWITTER https://twitter.com/newenglandcoin
REDDIT https://www.reddit.com/NewEnglandCoin/
Cheetah CPU Miner Software https://github.com/ShorelineCrypto/cheetah_cpuminer
Solo Mining with GPU or ASIC https://bitcointalk.org/index.php?topic=5027091.msg52187727#msg52187727
How to Run Two Full Node in Same Desktop PC https://bitcointalk.org/index.php?topic=5027091.msg53581449#msg53581449
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708 (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
FindBlocks http://findblocks.com/
CRpool http://crpool.xyz/
Cminors' Pool http://newenglandcoin.cminors-pool.com/
SPOOL https://spools.online/
Exchange
📷
https://shorelinecrypto.com/
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support https://bitcointalk.org/index.php?topic=5027091.msg55098029#msg55098029
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support https://bitcointalk.org/index.php?topic=5027091.msg54977437#msg54977437
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros https://bitcointalk.org/index.php?topic=5027091.msg54898540#msg54898540
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina https://bitcointalk.org/index.php?topic=5027091.msg54839522#msg54839522
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade https://bitcointalk.org/index.php?topic=5027091.msg54830333#msg54830333
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support https://bitcointalk.org/index.php?topic=5027091.msg54803639#msg54803639
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation https://bitcointalk.org/index.php?topic=5027091.msg54777222#msg54777222
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020 https://bitcointalk.org/index.php?topic=5027091.msg54694233#msg54694233
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode https://bitcointalk.org/index.php?topic=5027091.msg54645726#msg54645726
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing https://bitcointalk.org/index.php?topic=5027091.msg54030923#msg54030923
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1 https://bitcointalk.org/index.php?topic=5027091.msg53900926#msg53900926
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork https://bitcointalk.org/index.php?topic=5027091.msg53735458#msg53735458
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff https://bitcointalk.org/index.php?topic=5027091.msg53617358#msg53617358
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply https://www.reddit.com/NewEnglandCoin/comments/envmo1/explanation_of_base_diff_reset_and_effect_of/
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released https://bitcointalk.org/index.php?topic=5121953.msg53391184#msg53391184
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin https://bitcointalk.org/index.php?topic=5027091.msg52331201#msg52331201
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC https://bitcointalk.org/index.php?topic=5027091.msg52169572#msg52169572
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release https://bitcointalk.org/index.php?topic=5027091.msg51745839#msg51745839
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc https://bitcointalk.org/index.php?topic=5027091.msg51312291#msg51312291
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto https://bitcointalk.org/index.php?topic=5027091.msg50714764#msg50714764
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation https://bitcointalk.org/index.php?topic=5027091.msg50506585#msg50506585
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50417196#msg50417196
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50332097#msg50332097
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50208194#msg50208194
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated https://bitcointalk.org/index.php?topic=5027091.msg49931305#msg49931305
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin https://bitcointalk.org/index.php?topic=5027091.msg49875242#msg49875242
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork https://bitcointalk.org/index.php?topic=5027091.msg49831059#msg49831059
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork https://bitcointalk.org/index.php?topic=5027091.msg49685389#msg49685389
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac https://bitcointalk.org/index.php?topic=5027091.msg49218760#msg49218760
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet https://bitcointalk.org/index.php?topic=5027091.msg49202088#msg49202088
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows https://bitcointalk.org/index.php?topic=5027091.msg49004345#msg49004345
Dec 31, 2018 - Technical Whitepaper is Released https://bitcointalk.org/index.php?topic=5027091.msg48990334#msg48990334
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux https://bitcointalk.org/index.php?topic=5027091.msg48935135#msg48935135
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue https://bitcointalk.org/index.php?topic=5027091.msg48668375#msg48668375
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48258465#msg48258465
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC https://bitcointalk.org/index.php?topic=5027091.msg48298311#msg48298311
Nov 29, 2018 - A Warning to ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

Crypto history, part 2

Crypto history, part 2
So, we have already discussed the prerequisites for the creation of electronic currencies, as well as the appearance of the mysterious Satoshi Nakamoto. Today we will continue with this story.
According to Satoshi himself, the idea of ​​creating Bitcoin came to him in 2007. The announcement of the algorithm took place on October 31, 2008, when Satoshi published a «white paper» of bitcoin through the use of electronic mailing lists and sent it to all the addresses contained in the cypherpunk address book. When explaining the letter, he indicated that he had developed a peer-to-peer electronic money system, through which transactions could be performed directly but anonymously between the participants
Satoshi called Bitcoin «e-cash» or «electronic cash». Later, in 2011, Forbes magazine published an article entitled «Crypto currency» dedicated to Bitcoin, after which the term «cryptocurrency» became common place for such systems.
After the Electronic mailing, Satoshi and the cryptographers who joined him began work on the creation of a «client». In January 2009, Bitcoin 0.1 version was launched. Satoshi’s computer became the first «node», Hal Finney was the second to connect to the Blockchain network. In January the same year, the first block of coins was generated and the first transaction made. Satoshi had sent 10 bitcoins to Hal.
In September 2009, the first exchange of bitcoin for real money was made — user Martti Malmi received $ 5.02 for 5050 bitcoins from user ‘NewLibertyStandard’ via PayPal. In fact, this transaction was both a purchase and a sale. In October, the bitcoin exchange rate was determined by multiplying the average computing power used to obtain one coin multiplied by the cost of electricity in the United States, and thus, 1309 bitcoins could be bought for $ 1.
In November 2009, a forum was created on the website bitcoin.org where bitcoin enthusiasts could communicate with one another. With the growth in the number of nodes, the complexity of mining had increased, which in turn necessitated the search for newer ways to mine coins. Instead of mining using a CPU, Users began using the GPUs on video cards to improve the efficiency of their devices. During the same period, the user ArtForz created the first mining farm, which was a combination of several video cards constantly engaged in the mining process.
On July 17, 2010, the first digital currency exchange’ MtGox’ was created. Only 10 years later with the help of NeuronChain, the first digital currency exchange NeuronEx was created which allows users to make digital transactions of not only cryptocurrency, but fiat money!
Now all of the most popular digital currencies are available to transactions on NeuronEx — BTC, BCH, ETH, ETC, LTC, DASH, XRP, Dogecoin, EMC, EOS, BCH, BSV, EURT, USDT, CNHT, XAUT, as well as its own Neuron Coin — NRON.

https://preview.redd.it/4lz79yjgevn51.jpg?width=1200&format=pjpg&auto=webp&s=71467a05fae88c600f86c2380f9cd4aedcfa5802
#Finance #NeuronChain #blockchain #NeuronEx #NeuronWallet #CryptoNeuroNews #crypto
submitted by LadyMariann to NeuronChain [link] [comments]

Bitcoin mining: popular software for managing the processes

The Bitcoin exchange rate faced a significant drop not a long time ago, so a lot of miners think that mining this coin is not as profitable as before. However, Bitcoin is stabilizing, so now is the time to start mining it again. And, definitely, it is better to do this with reliable and efficient software.
There are a lot of operating systems for managing Bitcoin mining, so making a final choice can be a rather complicated task. This guide is here to help you — it describes features, advantages and disadvantages of the most popular software.

Hive OS: an all-in-one solution

Hive OS is a highly secure and stable mining platform based on the Linux distribution of Ubuntu. Besides, you will have no difficulties with its installation, setup and use. However, if you have any questions, you can always get in touch with the support team. The support is provided 24/7, so you will get help very quickly. There is also an extensive knowledge base that you can use.
Hive OS significantly simplifies even large farms’ management. A lot of things can be automated. For instance, automatic control of the fans, execution of commands according to the schedule, etc. Apart from this, switching between pools, wallets or coins takes only a second. The list of miners is updated regularly, just like the list of features — the Hive OS team is constantly working on the system considering the needs of the community. With Hive OS it is also possible to control the workers remotely.
Hive OS allows mining Bitcoin on ASICs and GPU rigs, offers its own pool and custom firmware for ASICs. It is an all-in-one solution that you can use in order to make the management process simpler and increase your profits.

СGMiner: suitable for experienced owners of AMD cards

CGMiner is an open-source miner focused specifically on mining Bitcoin (although some other coins can also be mined here). It supports GPU, ASIC and CPU mining, and is available for the following platforms: Windows, Linux and OS X. While using all the traditional features (for instance, overclocking) you won’t have to pay a dev fee.
However, this miner is not that suitable for inexperienced users — you at least need to have some knowledge of GitHub. Another thing to keep in mind is that CGMiner doesn’t work well with Nvidia cards.

Cudo Miner: a nice option for beginners

Cudo Miner is a simple to use crypto mining platform. Remote management, monitoring and overclocking — these and other standard features are available. Cudo Miner also offers automated mining and auto coin switching. Besides, if necessary, you can create custom templates in order to increase performance of your devices.
On the other side, Cudo Miner doesn’t support ASICs. One more unpleasant thing is that the fees are based on the amount of cryptocurrency mined in the last 30 days, and they are pretty high. For example, for less than 0.005 BTC, the fee is 6.5%.

SimpleMining: the choice of GPU owners

SimpleMining is a mining OS platform supporting all modern Nvidia and AMD GPUs. Using it, you can take bulk actions on multiple devices. Standard features like overclocking and undervolting are available as well. Besides, there are a lot of miner programmes to choose from, but you can still add a custom miner if necessary. But please keep in mind that it is impossible to mix AMD and Nvidia in one rig.

Hashr8: for users who know everything about mining

Hashr8 is an operating system suitable both for ASICs and GPU rigs. The system also supports many pools and miners. You can monitor devices not only in the web interface, but also via the mobile application. Support is provided around the clock. Besides, Hashr8 can be used for free — this option is available to miners using up to 3 devices inclusive. At the same time, there are no other restrictions — free users can use all the functions of the system.
However, despite the above-mentioned benefits, Hashr8 also has some disadvantages. Firstly, you can contact the support team only using the form on the website or by email, so there is no chance for getting help instantly. The website also has no FAQ, so if you run into a problem, you are likely to have to solve it yourself. Secondly, Hashr8 is a rather unstable system, which can affect your income.

Awesome Miner: suitable for centralized mining management

Awesome Miner allows managing and monitoring the mining operations, and supports ASICs and GPU rigs (CPU mining is possible too). Using it, you can perform operations both on individual miners and the groups, and build templates for easier configuration. Note that Awesome Miner can be used for free, but on certain conditions: you can have up to 2 miners, while the list of available features is rather limited.
Awesome Miner runs only on Windows, but you can still connect it to mining software running on Linux. Apart from this, it can be difficult for a new user to understand how this solution works, as its interface is not that convenient and intuitive.

What Software to Choose?

Obviously, the final decision completely depends on your needs, but we recommend choosing a universal system that supports GPU rigs and ASICs. By doing this, you will have freedom of action. A similar recommendation can be applied to GPU rigs — if you prefer them, choose a system that works both with Nvidia and AMD cards.
Make your choice wisely, and have profitable Bitcoin mining!
submitted by coldfeet45 to BitcoinMining [link] [comments]

ACIS-mining and its 3 best algorithms

ACIS-mining and its 3 best algorithms
Hello. 👋🏻 Today we will tell you about ACIS-mining and its 3 best algorithms.
📌 With the advent of ASICs for mining, it became possible to mine Bitcoin in much larger quantities than using video cards. ASIC is an integrated circuit specialized to solve a specific problem, in our case, only for bitcoin mining. These schemes are many times more profitable than video cards, because with more power (hash calculation speed) they consume much less energy. This served as a good reason to create a cryptocurrency mining business.
📌 In bitcoin and other blockchain systems, the complexity of mining depends on how quickly the miners find the block. Compared with the GPU and CPU, specialized #ASIC miners solve #PoW puzzles better and are therefore able to quickly find new blocks.
📌 Since PoW is still the preferred mining consensus mechanism, we propose to take a multiple algorithm approach. Instead of trying to use algorithms which are ASIC resistant, we propose to use algorithms which have had ASIC miners for quite some time. These are: #SHA256, #Scrypt, and #X11.
🔹 The SHA-256 algorithm has a number of advantages over other information protection technologies. Over the years of use in the cryptocurrency industry, he has shown his resistance to various hacking attempts.
🔹 Scrypt is a cryptocurrency mining algorithm that was previously interesting to many single miners in view of its resistance to the so-called “hardware attack”. The speed of creating blocks in a Scrypt-based blockchain is about 30 seconds. The hashrate, like Ethash, is measured in Megahash per second. Scrypt, first of all, became popular due to its use in Litecoin #cryptocurrency.
🔹 X11 is an encryption algorithm in which eleven are used instead of one function. This means that this technology can provide a high degree of security, because in order to harm the system, an attacker will have to crack all 11 functions, which is very unlikely, because the changes made will be visible after breaking the first function, and developers will have a lot of time to protect the system before the hacker reaches the eleventh function.
Since these miners are already in wide use, the distribution of mining should be fair and even. Furthermore, the use of three different algorithms results in a far less chance of any single person gaining a majority hash rate share. Lastly, we use the Multishield difficulty adjustment algorithm to prevent difficulty spike issues resulting from burst mining.
Read more about PYRK mining solutions here: https://www.pyrk.org
Read our Whitepaper to know more about the project:
https://www.pyrk.org/Pyrk-Whitepaper.pdf
https://preview.redd.it/rxmlr7wt1k251.png?width=1200&format=png&auto=webp&s=162f9ddaacb3cf3e137638464a208bdf25e50a21
submitted by VS_community to pyrk [link] [comments]

Most Important Cryptocurrencies

Bitcoin has been known by many to be the most famous decentralized cryptocurrency. However, besides bitcoin there exists other altcoins that confer a great value as well. Are you interested in learning about other cryptocurrencies? Well, bitcoin is not alone. Here are others.
1. Litecoin (LTC)
Statistics show that as of July 2018, Litecoin had per token value of $87.56. The coin was created by former Google engineer and MIT graduate named Charlie Lee. Just like bitcoin, Litecoin is not controlled by any central authority. It uses ''scrypt'' as proof of work. Different from bitcoin, Litecoin has got a faster block generation rate. This means that it offers a faster transaction confirmation.
The coin is based on an open source global payment network. The coin is generally accepted by merchants with the number growing each day. In July 2018, it had a market cap of $5.03 billion.
2. Ethereum (ETH)
It was launched in the year 2015. ETH is a decentralized software platform. It enables Distributed Applications and Smart Contracts to be built and run without downtime, fraud, control or third party interference. There exists a component called ether which acts like a vehicle within the ethereum platform. Developers seeking to develop and run applications within ethereum and investors aiming to purchases other digital currencies are the most interested parties in ether.
Value per token of ethereum as of July 2018 was $474.66 and a market cap of $ 47.84. Ethereum is the second most important cryptocurrency from bitcoin.
3. Zcash (ZEC)
Just like other altcoins, Zcash is an open-source and decentralized cryptocurrency. It was launched in the year 2016. This cryptocurrency is known to offer privacy and selective transparency of transactions. It's a unique feature different from other altcoins, isn't it?
ZEC claims to offer extra security where all the transactions are recorded and published on a blockchain. However, finer details involving the sender and recipient, and the amount are kept private. Statistics show that as of July 2018, Zcash had per token value of $206.23. It had a market cap of $904.85 in the same month.
4. Dash
It was originally known as darkcoin. Dash is a more secretive version of bitcoin. The working of Dash makes transactions almost untraceable. This because it provides anonymity since it works on a decentralized mastercode network.
Dash was launched in January 2014. Since then it has experienced an increase in fan following despite the short period of time. The cryptocurrency was created by Evan Duffield. It can be mined using a GPU or a CPU. Studies indicate that in July 2018, Dash had a market cap of $2.19 billion and value per token of $266.58.
submitted by shomesrobery to Roobetreviewa [link] [comments]

Russian nuclear scientists arrested for trying to use one of Russia's most powerful supercomputers to mine Bitcoins

Russian nuclear scientists arrested for trying to use one of Russia's most powerful supercomputers to mine Bitcoins submitted by rubberbandrocks to CryptoCurrency [link] [comments]

Learning about Bitcoin - including mining

I've been buying Bitcoin for a while mostly in a 'fad' state of mind; it's tomorrow's technology and hopes of making profit. But recently I've had new perspective after seeing how the world uses Bitcoin especially in Venezuela/Hong Kong and how the US treasury/federal system is spending money. So I've been reading and understnading Bitcoin more and wanted to learn about mining. I'll preface that I'm not in this to make money (I'm mostly a few years late anyways) but I want to learn more of the technology.
I'm mining with my GPU at the moment under a mining pool. My hashrate is about 9Mh/s which I'm not sure what that fully means. Am I computing 9000 'hash-computations per second towards finding the next block? I understand that a GPU will calculate solution faster than a CPU, but what should I be getting out of a GTX 1060 3GB for hash rate? Is there a way to optimize connection to the network?
https://imgur.com/a/ga94sSJ
Mostly any information would be helpful. I can follow directions on how to set up mining, but I want to know more about the inner workings and the hardware technology that goes along with it.
submitted by MINJAH139 to BitcoinMining [link] [comments]

Bitcoin mining: popular software for managing the processes

The Bitcoin exchange rate faced a significant drop not a long time ago, so a lot of miners think that mining this coin is not as profitable as before. However, Bitcoin is stabilizing, so now is the time to start mining it again. And, definitely, it is better to do this with reliable and efficient software.
There are a lot of operating systems for managing Bitcoin mining, so making a final choice can be a rather complicated task. This guide is here to help you — it describes features, advantages and disadvantages of the most popular software.

Hive OS: an all-in-one solution

Hive OS is a highly secure and stable mining platform based on the Linux distribution of Ubuntu. Besides, you will have no difficulties with its installation, setup and use. However, if you have any questions, you can always get in touch with the support team. The support is provided 24/7, so you will get help very quickly. There is also an extensive knowledge base that you can use.
Hive OS significantly simplifies even large farms’ management. A lot of things can be automated. For instance, automatic control of the fans, execution of commands according to the schedule, etc. Apart from this, switching between pools, wallets or coins takes only a second. The list of miners is updated regularly, just like the list of features — the Hive OS team is constantly working on the system considering the needs of the community. With Hive OS it is also possible to control the workers remotely.
Hive OS allows mining Bitcoin on ASICs and GPU rigs, offers its own pool and custom firmware for ASICs. It is an all-in-one solution that you can use in order to make the management process simpler and increase your profits.

СGMiner: suitable for experienced owners of AMD cards

CGMiner is an open-source miner focused specifically on mining Bitcoin (although some other coins can also be mined here). It supports GPU, ASIC and CPU mining, and is available for the following platforms: Windows, Linux and OS X. While using all the traditional features (for instance, overclocking) you won’t have to pay a dev fee.
However, this miner is not that suitable for inexperienced users — you at least need to have some knowledge of GitHub. Another thing to keep in mind is that CGMiner doesn’t work well with Nvidia cards.

Cudo Miner: a nice option for beginners

Cudo Miner is a simple to use crypto mining platform. Remote management, monitoring and overclocking — these and other standard features are available. Cudo Miner also offers automated mining and auto coin switching. Besides, if necessary, you can create custom templates in order to increase performance of your devices.
On the other side, Cudo Miner doesn’t support ASICs. One more unpleasant thing is that the fees are based on the amount of cryptocurrency mined in the last 30 days, and they are pretty high. For example, for less than 0.005 BTC, the fee is 6.5%.

SimpleMining: the choice of GPU owners

SimpleMining is a mining OS platform supporting all modern Nvidia and AMD GPUs. Using it, you can take bulk actions on multiple devices. Standard features like overclocking and undervolting are available as well. Besides, there are a lot of miner programmes to choose from, but you can still add a custom miner if necessary. But please keep in mind that it is impossible to mix AMD and Nvidia in one rig.

Hashr8: for users who know everything about mining

Hashr8 is an operating system suitable both for ASICs and GPU rigs. The system also supports many pools and miners. You can monitor devices not only in the web interface, but also via the mobile application. Support is provided around the clock. Besides, Hashr8 can be used for free — this option is available to miners using up to 3 devices inclusive. At the same time, there are no other restrictions — free users can use all the functions of the system.
However, despite the above-mentioned benefits, Hashr8 also has some disadvantages. Firstly, you can contact the support team only using the form on the website or by email, so there is no chance for getting help instantly. The website also has no FAQ, so if you run into a problem, you are likely to have to solve it yourself. Secondly, Hashr8 is a rather unstable system, which can affect your income.

Awesome Miner: suitable for centralized mining management

Awesome Miner allows managing and monitoring the mining operations, and supports ASICs and GPU rigs (CPU mining is possible too). Using it, you can perform operations both on individual miners and the groups, and build templates for easier configuration. Note that Awesome Miner can be used for free, but on certain conditions: you can have up to 2 miners, while the list of available features is rather limited.
Awesome Miner runs only on Windows, but you can still connect it to mining software running on Linux. Apart from this, it can be difficult for a new user to understand how this solution works, as its interface is not that convenient and intuitive.

What Software to Choose?

Obviously, the final decision completely depends on your needs, but we recommend choosing a universal system that supports GPU rigs and ASICs. By doing this, you will have freedom of action. A similar recommendation can be applied to GPU rigs — if you prefer them, choose a system that works both with Nvidia and AMD cards.
Make your choice wisely, and have profitable Bitcoin mining!
submitted by armabotwe to nem [link] [comments]

Filecoin | Development Status and Mining Progress

Author: Gamals Ahmed, CoinEx Business Ambassador
https://preview.redd.it/5bqakdqgl3g51.jpg?width=865&format=pjpg&auto=webp&s=b709794863977eb6554e3919b9e00ca750e3e704
A decentralized storage network that transforms cloud storage into an account market. Miners obtain the integrity of the original protocol by providing data storage and / or retrieval. On the contrary, customers pay miners to store or distribute data and retrieve it.
Filecoin announced, that there will be more delays before its main network is officially launched.
Filecoin developers postponed the release date of their main network to late July to late August 2020.
As mentioned in a recent announcement, the Filecoin team said that the initiative completed the first round of the internal protocol security audit. Platform developers claim that the results of the review showed that they need to make several changes to the protocol’s code base before performing the second stage of the software testing process.
Created by Protocol Labs, Filecoin was developed using File System (IPFS), which is a peer-to-peer data storage network. Filecoin will allow users to trade storage space in an open and decentralized market.
Filecoin developers implemented one of the largest cryptocurrency sales in 2017. They have privately obtained over $ 200 million from professional or accredited investors, including many institutional investors.
The main network was slated to launch last month, but in February 2020, the Philly Queen development team delayed the release of the main network between July 15 and July 17, 2020.
They claimed that the outbreak of the Coronavirus (COVID-19) in China was the main cause of the delay. The developers now say that they need more time to solve the problems found during a recent codecase audit.
The Filecoin team noted the following:
“We have drafted a number of protocol changes to ensure that building our major network launch is safe and economically sound.” The project developers will add them to two different implementations of Filecoin (Lotus and go-filecoin) in the coming weeks.
Filecoin developers conducted a survey to allow platform community members to cast their votes on three different launch dates for Testnet Phase 2 and mainnet.
The team reported that the community gave their votes. Based on the vote results, the Filecoin team announced a “conservative” estimate that the second phase of the network test should begin by May 11, 2020. The main Filecoin network may be launched sometime between July 20 and August 21, 2020.
The updates to the project can be found on the Filecoin Road Map.
Filecoin developers stated:
“This option will make us get the most important protocol changes first, and then implement the rest as protocol updates during testnet.” Filecoin is back down from the final test stage.
Another filecoin decentralized storage network provider launched its catalytic test network, the final stage of the storage network test that supports the blockchain.
In a blog post on her website, Filecoin said she will postpone the last test round until August. The company also announced a calibration period from July 20 to August 3 to allow miners to test their mining settings and get an idea of how competition conditions affected their rewards.
Filecoin had announced earlier last month that the catalytic testnet test would precede its flagship launch. The delay in the final test also means that the company has returned the main launch window between August 31 and September 21.
Despite the lack of clear incentives for miners and multiple delays, Filecoin has succeeded in attracting huge interest, especially in China. Investors remained highly speculating on the network’s mining hardware and its premium price.
Mining in Filecoin
In most blockchain protocols, “miners” are network participants who do the work necessary to promote and maintain the blockchain. To provide these services, miners are compensated in the original cryptocurrency.
Mining in Filecoin works completely differently — instead of contributing to computational power, miners contribute storage capacity to use for dealing with customers looking to store data.
Filecoin will contain several types of miners:
Storage miners responsible for storing files and data on the network. Miners retrieval, responsible for providing quick tubes for file recovery. Miners repair to be carried out.
Storage miners are the heart of the network. They earn Filecoin by storing data for clients, and computerizing cipher directories to check storage over time. The probability of earning the reward reward and transaction fees is proportional to the amount of storage that the Miner contributes to the Filecoin network, not the hash power.
Retriever miners are the veins of the network. They earn Filecoin by winning bids and mining fees for a specific file, which is determined by the market value of the said file size. Miners bandwidth and recovery / initial transaction response time will determine its ability to close recovery deals on the network.
The maximum bandwidth of the recovery miners will determine the total amount of deals that it can enter into.
In the current implementation, the focus is mostly on storage miners, who sell storage capacity for FIL.

Hardware recommendations

The current system specifications recommended for running the miner are:
Compared to the hardware requirements for running a validity checker, these standards are much higher — although they definitely deserve it. Since these will not increase in the presumed future, the money spent on Filecoin mining hardware will provide users with many years of reliable service, and they pay themselves many times. Think of investing as a small business for cloud storage. To launch a model on the current data hosting model, it will cost millions of dollars in infrastructure and logistics to get started. With Filecoin, you can do the same for a few thousand dollars.
Proceed to mining
Deals are the primary function of the Filecoin network, and it represents an agreement between a client and miners for a “storage” contract.
Once the customer decides to have a miner to store based on the available capacity, duration and price required, he secures sufficient funds in a linked portfolio to cover the total cost of the deal. The deal is then published once the mine accepts the storage agreement. By default, all Filecoin miners are set to automatically accept any deal that meets their criteria, although this can be disabled for miners who prefer to organize their deals manually.
After the deal is published, the customer prepares the data for storage and then transfers it to the miner. Upon receiving all the data, the miner fills in the data in a sector, closes it, and begins to provide proofs to the chain. Once the first confirmation is obtained, the customer can make sure the data is stored correctly, and the deal has officially started.
Throughout the deal, the miner provides continuous proofs to the chain. Clients gradually pay with money they previously closed. If there is missing or late evidence, the miner is punished. More information about this can be found in the Runtime, Cut and Penalties section of this page.
At Filecoin, miners earn two different types of rewards for their efforts: storage fees and reward prevention.
Storage fees are the fees that customers pay regularly after reaching a deal, in exchange for storing data. This fee is automatically deposited into the withdrawal portfolio associated with miners while they continue to perform their duties over time, and is locked for a short period upon receipt.
Block rewards are large sums given to miners calculated on a new block. Unlike storage fees, these rewards do not come from a linked customer; Instead, the new FIL “prints” the network as an inflationary and incentive measure for miners to develop the chain. All active miners on the network have a chance to get a block bonus, their chance to be directly proportional to the amount of storage space that is currently being contributed to the network.
Duration of operation, cutting and penalties
“Slashing” is a feature found in most blockchain protocols, and is used to punish miners who fail to provide reliable uptime or act maliciously against the network.
In Filecoin, miners are susceptible to two different types of cut: storage error cut, unanimously reduce error.
Storage Error Reduction is a term used to include a wider range of penalties, including error fees, sector penalties, and termination fees. Miners must pay these penalties if they fail to provide reliability of the sector or decide to leave the network voluntarily.
An error fee is a penalty that a miner incurs for each non-working day. Sector punishment: A penalty incurred by a miner of a disrupted sector for which no error was reported before the WindowPoSt inspection.
The sector will pay an error fee after the penalty of the sector once the error is discovered.
Termination Fee: A penalty that a miner incurs when a sector is voluntary or involuntarily terminated and removed from the network.
Cutting consensus error is the penalty that a miner incurs for committing consensus errors. This punishment applies to miners who have acted maliciously against the network consensus function.
Filecoin miners
Eight of the top 10 Felticoin miners are Chinese investors or companies, according to the blockchain explorer, while more companies are selling cloud mining contracts and distributed file sharing system hardware. CoinDesk’s Wolfe Chao wrote: “China’s craze for Filecoin may have been largely related to the long-standing popularity of crypto mining in the country overall, which is home to about 65% of the computing power on Bitcoin at discretion.”
With Filecoin approaching the launch of the mainnet blocknet — after several delays since the $ 200 million increase in 2017 — Chinese investors are once again speculating strongly about network mining devices and their premium prices.
Since Protocol Labs, the company behind Filecoin, released its “Test Incentives” program on June 9 that was scheduled to start in a week’s time, more than a dozen Chinese companies have started selling cloud mining contracts and hardware — despite important details such as economics Mining incentives on the main network are still endless.
Sales volumes to date for each of these companies can range from half a million to tens of millions of dollars, according to self-reported data on these platforms that CoinDesk has watched and interviews with several mining hardware manufacturers.
Filecoin’s goal is to build a distributed storage network with token rewards to spur storage hosting as a way to drive wider adoption. Protocol Labs launched a test network in December 2019. But the tokens mined in the testing environment so far are not representative of the true silicon coin that can be traded when the main network is turned on. Moreover, the mining incentive economics on testnet do not represent how final block rewards will be available on the main network.
However, data from Blockecoin’s blocknetin testnet explorers show that eight out of 10 miners with the most effective mining force on testnet are currently Chinese miners.
These eight miners have about 15 petabytes (PB) of effective storage mining power, accounting for more than 85% of the total test of 17.9 petable. For the context, 1 petabyte of hard disk storage = 1000 terabytes (terabytes) = 1 million gigabytes (GB).
Filecoin craze in China may be closely related to the long-standing popularity of crypt mining in the country overall, which is home to about 65% of the computing power on Bitcoin by estimation. In addition, there has been a lot of hype in China about foreign exchange mining since 2018, as companies promote all types of devices when the network is still in development.
“Encryption mining has always been popular in China,” said Andy Tien, co-founder of 1475, one of several mining hardware manufacturers in Philquin supported by prominent Chinese video indicators such as Fenbushi and Hashkey Capital.
“Even though the Velikoyen mining process is more technologically sophisticated, the idea of mining using hard drives instead of specialized machines like Bitcoin ASIC may be a lot easier for retailers to understand,” he said.
Meanwhile, according to Feixiaohao, a Chinese service comparable to CoinMarketCap, nearly 50 Chinese crypto exchanges are often somewhat unknown with some of the more well-known exchanges including Gate.io and Biki — have listed trading pairs for Filecoin currency contracts for USDT.
In bitcoin mining, at the current difficulty level, one segment per second (TH / s) fragmentation rate is expected to generate around 0.000008 BTC within 24 hours. The higher the number of TH / s, the greater the number of bitcoins it should be able to produce proportionately. But in Filecoin, the efficient mining force of miners depends on the amount of data stamped on the hard drive, not the total size of the hard drive.
To close data in the hard drive, the Filecoin miner still needs processing power, i.e. CPU or GPU as well as RAM. More powerful processors with improved software can confine data to the hard drive more quickly, so miners can combine more efficient mining energy faster on a given day.
As of this stage, there appears to be no transparent way at the network level for retail investors to see how much of the purchased hard disk drive was purchased which actually represents an effective mining force.
The U.S.-based Labs Protocol was behind Filecoin’s initial coin offer for 2017, which raised an astonishing $ 200 million.
This was in addition to a $ 50 million increase in private investment supported by notable venture capital projects including Sequoia, Anderson Horowitz and Union Square Ventures. CoinDk’s parent company, CoinDk, has also invested in Protocol Labs.
After rounds of delay, Protocol Protocols said in September 2019 that a testnet launch would be available around December 2019 and the main network would be rolled out in the first quarter of 2020.
The test started as promised, but the main network has been delayed again and is now expected to launch in August 2020. What is Filecoin mining process?
Filecoin mainly consists of three parts: the storage market (the chain), the blockecin Filecoin, and the search market (under the chain). Storage and research market in series and series respectively for security and efficiency. For users, the storage frequency is relatively low, and the security requirements are relatively high, so the storage process is placed on the chain. The retrieval frequency is much higher than the storage frequency when there is a certain amount of data. Given the performance problem in processing data on the chain, the retrieval process under the chain is performed. In order to solve the security issue of payment in the retrieval process, Filecoin adopts the micro-payment strategy. In simple terms, the process is to split the document into several copies, and every time the user gets a portion of the data, the corresponding fee is paid. Types of mines corresponding to Filecoin’s two major markets are miners and warehousers, among whom miners are primarily responsible for storing data and block packages, while miners are primarily responsible for data query. After the stable operation of the major Filecoin network in the future, the mining operator will be introduced, who is the main responsible for data maintenance.
In the initial release of Filecoin, the request matching mechanism was not implemented in the storage market and retrieval market, but the takeover mechanism was adopted. The three main parts of Filecoin correspond to three processes, namely the stored procedure, retrieval process, packaging and reward process. The following figure shows the simplified process and the income of the miners:
The Filecoin mining process is much more complicated, and the important factor in determining the previous mining profit is efficient storage. Effective storage is a key feature that distinguishes Filecoin from other decentralized storage projects. In Filecoin’s EC consensus, effective storage is similar to interest in PoS, which determines the likelihood that a miner will get the right to fill, that is, the proportion of miners effectively stored in the entire network is proportional to final mining revenue.
It is also possible to obtain higher effective storage under the same hardware conditions by improving the mining algorithm. However, the current increase in the number of benefits that can be achieved by improving the algorithm is still unknown.
It seeks to promote mining using Filecoin Discover
Filecoin announced Filecoin Discover — a step to encourage miners to join the Filecoin network. According to the company, Filecoin Discover is “an ever-growing catalog of numerous petabytes of public data covering literature, science, art, and history.” Miners interested in sharing can choose which data sets they want to store, and receive that data on a drive at a cost. In exchange for storing this verified data, miners will earn additional Filecoin above the regular block rewards for storing data. Includes the current catalog of open source data sets; ENCODE, 1000 Genomes, Project Gutenberg, Berkley Self-driving data, more projects, and datasets are added every day.
Ian Darrow, Head of Operations at Filecoin, commented on the announcement:
“Over 2.5 quintillion bytes of data are created every day. This data includes 294 billion emails, 500 million tweets and 64 billion messages on social media. But it is also climatology reports, disease tracking maps, connected vehicle coordinates and much more. It is extremely important that we maintain data that will serve as the backbone for future research and discovery”.
Miners who choose to participate in Filecoin Discover may receive hard drives pre-loaded with verified data, as well as setup and maintenance instructions, depending on the company. The Filecoin team will also host the Slack (fil-Discover-support) channel where miners can learn more.
Filecoin got its fair share of obstacles along the way. Last month Filecoin announced a further delay before its main network was officially launched — after years of raising funds.
In late July QEBR (OTC: QEBR) announced that it had ceded ownership of two subsidiaries in order to focus all of the company’s resources on building blockchain-based mining operations.
The QEBR technology team previously announced that it has proven its system as a Filecoin node valid with CPU, GPU, bandwidth and storage compatibility that meets all IPFS guidelines. The QEBR test system is connected to the main Filecoin blockchain and the already mined filecoin coin has already been tested.
“The disclosure of Sheen Boom and Jihye will allow our team to focus only on the upcoming global launch of Filecoin. QEBR branch, Shenzhen DZD Digital Technology Ltd. (“ DZD “), has a strong background in blockchain development, extraction Data, data acquisition, data processing, data technology research. We strongly believe Filecoin has the potential to be a leading blockchain-based cryptocurrency and will make every effort to make QEBR an important player when Mainecoin mainnet will be launched soon”.
IPFS and Filecoin
Filecoin and IPFS are complementary protocols for storing and sharing data in a decentralized network. While users are not required to use Filecoin and IPFS together, the two combined are working to resolve major failures in the current web infrastructure.
IPFS
It is an open source protocol that allows users to store and transmit verifiable data with each other. IPFS users insist on data on the network by installing it on their own device, to a third-party cloud service (known as Pinning Services), or through community-oriented systems where a group of individual IPFS users share resources to ensure the content stays live.
The lack of an integrated catalytic mechanism is the challenge Filecoin hopes to solve by allowing users to catalyze long-term distributed storage at competitive prices through the storage contract market, while maintaining the efficiency and flexibility that the IPFS network provides.
Using IPFS
In IPFS, the data is hosted by the required data installation nodes. For data to persist while the user node is offline, users must either rely on their other peers to install their data voluntarily or use a central install service to store data.
Peer-to-peer reliance caching data may be a good thing as one or multiple organizations share common files on an internal network, or where strong social contracts can be used to ensure continued hosting and preservation of content in the long run. Most users in an IPFS network use an installation service.
Using Filecoin
The last option is to install your data in a decentralized storage market, such as Filecoin. In Filecoin’s structure, customers make regular small payments to store data when a certain availability, while miners earn those payments by constantly checking the integrity of this data, storing it, and ensuring its quick recovery. This allows users to motivate Filecoin miners to ensure that their content will be live when it is needed, a distinct advantage of relying only on other network users as required using IPFS alone.
Filecoin, powered by IPFS
It is important to know that Filecoin is built on top of IPFS. Filecoin aims to be a very integrated and seamless storage market that takes advantage of the basic functions provided by IPFS, they are connected to each other, but can be implemented completely independently of each other. Users do not need to interact with Filecoin in order to use IPFS.
Some advantages of sharing Filecoin with IPFS:
Of all the decentralized storage projects, Filecoin is undoubtedly the most interested, and IPFS has been running stably for two years, fully demonstrating the strength of its core protocol.
Filecoin’s ability to obtain market share from traditional central storage depends on end-user experience and storage price. Currently, most Filecoin nodes are posted in the IDC room. Actual deployment and operation costs are not reduced compared to traditional central cloud storage, and the storage process is more complicated.
PoRep and PoSt, which has a large number of proofs of unknown operation, are required to cause the actual storage cost to be so, in the early days of the release of Filecoin. The actual cost of storing data may be higher than the cost of central cloud storage, but the initial storage node may reduce the storage price in order to obtain block rewards, which may result in the actual storage price lower than traditional central cloud storage.
In the long term, Filecoin still needs to take full advantage of its P2P storage, convert storage devices from specialization to civil use, and improve its algorithms to reduce storage costs without affecting user experience. The storage problem is an important problem to be solved in the blockchain field, so a large number of storage projects were presented at the 19th Web3 Summit. IPFS is an important part of Web3 visibility. Its development will affect the development of Web3 to some extent. Likewise, Web3 development somewhat determines the future of IPFS. Filecoin is an IPFS-based storage class project initiated by IPFS. There is no doubt that he is highly expected.
Resources :
  1. https://www.coindesk.com/filecoin-pushes-back-final-testing-phase-announces-calibration-period-for-miners
  2. https://docs.filecoin.io/mine/#types-of-miners https://www.nasdaq.com/articles/inside-the-craze-for-filecoin-crypto-mining-in-china-2020-07-12؟amp
  3. https://www.prnewswire.com/news-releases/qebr-streamlines-holdings-to-concentrate-on-filecoin-development-and-mining-301098731.html
  4. https://www.crowdfundinsider.com/2020/05/161200-filecoin-seeks-to-boost-mining-with-filecoin-discove
  5. https://zephyrnet.com/filecoin-seeks-to-boost-mining-with-filecoin-discove
  6. https://docs.filecoin.io/introduction/ipfs-and-filecoin/#filecoin-powered-by-ipfs
submitted by CoinEx_Institution to filecoin [link] [comments]

Do you know the outstanding features of ROI coins?

As I know, cryptocurrency traders are making a lot of money today. Many coins had some nice features, but one coin didn't contain everything.
But I think ROI coins are essentially coins that combine all the very good features of many great coins into one coin.
The focus of ROI coins is on the community and the coin revolves around the people who support it. That is, the coin has an ear that listens to the consensus of the community, and as it moves forward, it changes and evolves based on the input of its backers.
You can mine, stake, term-deposit, buy and sell without needing specialized equipment or advanced technical knowledge.
Beyond that, you can also get involved by participating in our online community where you can discuss and learn about ROI Coin as well as other topics of interest in the Bitcoin-altcoin world.
Features of ROI Coin
ROI Coin was designed for simplicity and mass adoption. Because of this it has many great features that will allow it to be easy to understand and use by people who are not necessarily tech-savvy or experienced in altcoins.
 CPU only mining that is GPU and Asics resistant to favor consumer-grade computers  Reasonable 15% APR gains on any coins sitting in the wallet  Wallet available for Windows 32 bit, 64 bit and Linux  One mouse click mining right from the wallet  Fast network transaction processing  Automatic peer connecting to synchronize the wallet  The wallet displays detailed information on term-deposited coins  The wallet has built-in encryption capability  The wallet has the built-in backup capability  Wallet debug window contains blockchain, network traffic and peers info, and console  MIDAS implementation for enhanced blockchain security  Website exchange to buy/sell products/services using ROI Coin
A coin that gives you triple hybrid capabilities:
 POW mining  POS staking  Term Deposits. CPU mineable is ASIC and GPU resistant with prove.n MIDAS hash rate difficulty adjustment.
Staking term deposits whether or not you even have your wallet on. Standard POS 15 %, 1 Month Deposit 2.40%, 3 Month Deposit 6.28%, 6 Month Deposit 10.65%, 9 Month Deposit 14.26%, 1 Year Deposit 18.07%. Low inflation rate and great community. Solid wallet versions built for Windows, Linux, and MAC. For people with limited internet, you can stake your coins, then print out a paper wallet and delete the computer wallet. Reimport that paper wallet when you are ready and you'll have the initial balance + full interest payout. So you can simply visit at roi-coin.com
submitted by dojogang to u/dojogang [link] [comments]

Bitcoin mining: popular software for managing the processes

The Bitcoin exchange rate faced a significant drop not a long time ago, so a lot of miners think that mining this coin is not as profitable as before. However, Bitcoin is stabilizing, so now is the time to start mining it again. And, definitely, it is better to do this with reliable and efficient software.
There are a lot of operating systems for managing Bitcoin mining, so making a final choice can be a rather complicated task. This guide is here to help you — it describes features, advantages and disadvantages of the most popular software.

Hive OS: an all-in-one solution

Hive OS is a highly secure and stable mining platform based on the Linux distribution of Ubuntu. Besides, you will have no difficulties with its installation, setup and use. However, if you have any questions, you can always get in touch with the support team. The support is provided 24/7, so you will get help very quickly. There is also an extensive knowledge base that you can use.
Hive OS significantly simplifies even large farms’ management. A lot of things can be automated. For instance, automatic control of the fans, execution of commands according to the schedule, etc. Apart from this, switching between pools, wallets or coins takes only a second. The list of miners is updated regularly, just like the list of features — the Hive OS team is constantly working on the system considering the needs of the community. With Hive OS it is also possible to control the workers remotely.
Hive OS allows mining Bitcoin on ASICs and GPU rigs, offers its own pool and custom firmware for ASICs. It is an all-in-one solution that you can use in order to make the management process simpler and increase your profits.

СGMiner: suitable for experienced owners of AMD cards

CGMiner is an open-source miner focused specifically on mining Bitcoin (although some other coins can also be mined here). It supports GPU, ASIC and CPU mining, and is available for the following platforms: Windows, Linux and OS X. While using all the traditional features (for instance, overclocking) you won’t have to pay a dev fee.
However, this miner is not that suitable for inexperienced users — you at least need to have some knowledge of GitHub. Another thing to keep in mind is that CGMiner doesn’t work well with Nvidia cards.

Cudo Miner: a nice option for beginners

Cudo Miner is a simple to use crypto mining platform. Remote management, monitoring and overclocking — these and other standard features are available. Cudo Miner also offers automated mining and auto coin switching. Besides, if necessary, you can create custom templates in order to increase performance of your devices.
On the other side, Cudo Miner doesn’t support ASICs. One more unpleasant thing is that the fees are based on the amount of cryptocurrency mined in the last 30 days, and they are pretty high. For example, for less than 0.005 BTC, the fee is 6.5%.

SimpleMining: the choice of GPU owners

SimpleMining is a mining OS platform supporting all modern Nvidia and AMD GPUs. Using it, you can take bulk actions on multiple devices. Standard features like overclocking and undervolting are available as well. Besides, there are a lot of miner programmes to choose from, but you can still add a custom miner if necessary. But please keep in mind that it is impossible to mix AMD and Nvidia in one rig.

Hashr8: for users who know everything about mining

Hashr8 is an operating system suitable both for ASICs and GPU rigs. The system also supports many pools and miners. You can monitor devices not only in the web interface, but also via the mobile application. Support is provided around the clock. Besides, Hashr8 can be used for free — this option is available to miners using up to 3 devices inclusive. At the same time, there are no other restrictions — free users can use all the functions of the system.
However, despite the above-mentioned benefits, Hashr8 also has some disadvantages. Firstly, you can contact the support team only using the form on the website or by email, so there is no chance for getting help instantly. The website also has no FAQ, so if you run into a problem, you are likely to have to solve it yourself. Secondly, Hashr8 is a rather unstable system, which can affect your income.

Awesome Miner: suitable for centralized mining management

Awesome Miner allows managing and monitoring the mining operations, and supports ASICs and GPU rigs (CPU mining is possible too). Using it, you can perform operations both on individual miners and the groups, and build templates for easier configuration. Note that Awesome Miner can be used for free, but on certain conditions: you can have up to 2 miners, while the list of available features is rather limited.
Awesome Miner runs only on Windows, but you can still connect it to mining software running on Linux. Apart from this, it can be difficult for a new user to understand how this solution works, as its interface is not that convenient and intuitive.

What Software to Choose?

Obviously, the final decision completely depends on your needs, but we recommend choosing a universal system that supports GPU rigs and ASICs. By doing this, you will have freedom of action. A similar recommendation can be applied to GPU rigs — if you prefer them, choose a system that works both with Nvidia and AMD cards.
Make your choice wisely, and have profitable Bitcoin mining!
submitted by sillylamb44 to CryptoCurrencyTrading [link] [comments]

Bitcoin mining: popular software for managing the processes

The Bitcoin exchange rate faced a significant drop not a long time ago, so a lot of miners think that mining this coin is not as profitable as before. However, Bitcoin is stabilizing, so now is the time to start mining it again. And, definitely, it is better to do this with reliable and efficient software.
There are a lot of operating systems for managing Bitcoin mining, so making a final choice can be a rather complicated task. This guide is here to help you — it describes features, advantages and disadvantages of the most popular software.

Hive OS: an all-in-one solution

Hive OS is a highly secure and stable mining platform based on the Linux distribution of Ubuntu. Besides, you will have no difficulties with its installation, setup and use. However, if you have any questions, you can always get in touch with the support team. The support is provided 24/7, so you will get help very quickly. There is also an extensive knowledge base that you can use.
Hive OS significantly simplifies even large farms’ management. A lot of things can be automated. For instance, automatic control of the fans, execution of commands according to the schedule, etc. Apart from this, switching between pools, wallets or coins takes only a second. The list of miners is updated regularly, just like the list of features — the Hive OS team is constantly working on the system considering the needs of the community. With Hive OS it is also possible to control the workers remotely.
Hive OS allows mining Bitcoin on ASICs and GPU rigs, offers its own pool and custom firmware for ASICs. It is an all-in-one solution that you can use in order to make the management process simpler and increase your profits.

СGMiner: suitable for experienced owners of AMD cards

CGMiner is an open-source miner focused specifically on mining Bitcoin (although some other coins can also be mined here). It supports GPU, ASIC and CPU mining, and is available for the following platforms: Windows, Linux and OS X. While using all the traditional features (for instance, overclocking) you won’t have to pay a dev fee.
However, this miner is not that suitable for inexperienced users — you at least need to have some knowledge of GitHub. Another thing to keep in mind is that CGMiner doesn’t work well with Nvidia cards.

Cudo Miner: a nice option for beginners

Cudo Miner is a simple to use crypto mining platform. Remote management, monitoring and overclocking — these and other standard features are available. Cudo Miner also offers automated mining and auto coin switching. Besides, if necessary, you can create custom templates in order to increase performance of your devices.
On the other side, Cudo Miner doesn’t support ASICs. One more unpleasant thing is that the fees are based on the amount of cryptocurrency mined in the last 30 days, and they are pretty high. For example, for less than 0.005 BTC, the fee is 6.5%.

SimpleMining: the choice of GPU owners

SimpleMining is a mining OS platform supporting all modern Nvidia and AMD GPUs. Using it, you can take bulk actions on multiple devices. Standard features like overclocking and undervolting are available as well. Besides, there are a lot of miner programmes to choose from, but you can still add a custom miner if necessary. But please keep in mind that it is impossible to mix AMD and Nvidia in one rig.

Hashr8: for users who know everything about mining

Hashr8 is an operating system suitable both for ASICs and GPU rigs. The system also supports many pools and miners. You can monitor devices not only in the web interface, but also via the mobile application. Support is provided around the clock. Besides, Hashr8 can be used for free — this option is available to miners using up to 3 devices inclusive. At the same time, there are no other restrictions — free users can use all the functions of the system.
However, despite the above-mentioned benefits, Hashr8 also has some disadvantages. Firstly, you can contact the support team only using the form on the website or by email, so there is no chance for getting help instantly. The website also has no FAQ, so if you run into a problem, you are likely to have to solve it yourself. Secondly, Hashr8 is a rather unstable system, which can affect your income.

Awesome Miner: suitable for centralized mining management

Awesome Miner allows managing and monitoring the mining operations, and supports ASICs and GPU rigs (CPU mining is possible too). Using it, you can perform operations both on individual miners and the groups, and build templates for easier configuration. Note that Awesome Miner can be used for free, but on certain conditions: you can have up to 2 miners, while the list of available features is rather limited.
Awesome Miner runs only on Windows, but you can still connect it to mining software running on Linux. Apart from this, it can be difficult for a new user to understand how this solution works, as its interface is not that convenient and intuitive.

What Software to Choose?

Obviously, the final decision completely depends on your needs, but we recommend choosing a universal system that supports GPU rigs and ASICs. By doing this, you will have freedom of action. A similar recommendation can be applied to GPU rigs — if you prefer them, choose a system that works both with Nvidia and AMD cards.
Make your choice wisely, and have profitable Bitcoin mining!
submitted by sillycheetah59 to CryptoCurrencies [link] [comments]

Bitcoin mining: popular software for managing the processes

The Bitcoin exchange rate faced a significant drop not a long time ago, so a lot of miners think that mining this coin is not as profitable as before. However, Bitcoin is stabilizing, so now is the time to start mining it again. And, definitely, it is better to do this with reliable and efficient software.
There are a lot of operating systems for managing Bitcoin mining, so making a final choice can be a rather complicated task. This guide is here to help you — it describes features, advantages and disadvantages of the most popular software.

Hive OS: an all-in-one solution

Hive OS is a highly secure and stable mining platform based on the Linux distribution of Ubuntu. Besides, you will have no difficulties with its installation, setup and use. However, if you have any questions, you can always get in touch with the support team. The support is provided 24/7, so you will get help very quickly. There is also an extensive knowledge base that you can use.
Hive OS significantly simplifies even large farms’ management. A lot of things can be automated. For instance, automatic control of the fans, execution of commands according to the schedule, etc. Apart from this, switching between pools, wallets or coins takes only a second. The list of miners is updated regularly, just like the list of features — the Hive OS team is constantly working on the system considering the needs of the community. With Hive OS it is also possible to control the workers remotely.
Hive OS allows mining Bitcoin on ASICs and GPU rigs, offers its own pool and custom firmware for ASICs. It is an all-in-one solution that you can use in order to make the management process simpler and increase your profits.

СGMiner: suitable for experienced owners of AMD cards

CGMiner is an open-source miner focused specifically on mining Bitcoin (although some other coins can also be mined here). It supports GPU, ASIC and CPU mining, and is available for the following platforms: Windows, Linux and OS X. While using all the traditional features (for instance, overclocking) you won’t have to pay a dev fee.
However, this miner is not that suitable for inexperienced users — you at least need to have some knowledge of GitHub. Another thing to keep in mind is that CGMiner doesn’t work well with Nvidia cards.

Cudo Miner: a nice option for beginners

Cudo Miner is a simple to use crypto mining platform. Remote management, monitoring and overclocking — these and other standard features are available. Cudo Miner also offers automated mining and auto coin switching. Besides, if necessary, you can create custom templates in order to increase performance of your devices.
On the other side, Cudo Miner doesn’t support ASICs. One more unpleasant thing is that the fees are based on the amount of cryptocurrency mined in the last 30 days, and they are pretty high. For example, for less than 0.005 BTC, the fee is 6.5%.

SimpleMining: the choice of GPU owners

SimpleMining is a mining OS platform supporting all modern Nvidia and AMD GPUs. Using it, you can take bulk actions on multiple devices. Standard features like overclocking and undervolting are available as well. Besides, there are a lot of miner programmes to choose from, but you can still add a custom miner if necessary. But please keep in mind that it is impossible to mix AMD and Nvidia in one rig.

Hashr8: for users who know everything about mining

Hashr8 is an operating system suitable both for ASICs and GPU rigs. The system also supports many pools and miners. You can monitor devices not only in the web interface, but also via the mobile application. Support is provided around the clock. Besides, Hashr8 can be used for free — this option is available to miners using up to 3 devices inclusive. At the same time, there are no other restrictions — free users can use all the functions of the system.
However, despite the above-mentioned benefits, Hashr8 also has some disadvantages. Firstly, you can contact the support team only using the form on the website or by email, so there is no chance for getting help instantly. The website also has no FAQ, so if you run into a problem, you are likely to have to solve it yourself. Secondly, Hashr8 is a rather unstable system, which can affect your income.

Awesome Miner: suitable for centralized mining management

Awesome Miner allows managing and monitoring the mining operations, and supports ASICs and GPU rigs (CPU mining is possible too). Using it, you can perform operations both on individual miners and the groups, and build templates for easier configuration. Note that Awesome Miner can be used for free, but on certain conditions: you can have up to 2 miners, while the list of available features is rather limited.
Awesome Miner runs only on Windows, but you can still connect it to mining software running on Linux. Apart from this, it can be difficult for a new user to understand how this solution works, as its interface is not that convenient and intuitive.

What Software to Choose?

Obviously, the final decision completely depends on your needs, but we recommend choosing a universal system that supports GPU rigs and ASICs. By doing this, you will have freedom of action. A similar recommendation can be applied to GPU rigs — if you prefer them, choose a system that works both with Nvidia and AMD cards.
Make your choice wisely, and have profitable Bitcoin mining!
submitted by sillylamb44 to BytecoinBCN [link] [comments]

BitcoinZ CPU and GPU mining How To Mine 1 Bitcoin in 10 Minutes - Blockchain BTC Miner ... Raspberry Pi 4 Bitcoin Mining For 24 Hours! - YouTube How to mine bitcoins (solo mining) with the core client ... SprintPay Review [NEW CPU Mining Coin!]

CPU is the Central Processing Unit of your computer. Intel and AMD produce the vast majority of them. CPUs are essentially the brains of the computer. When Bitcoin was first released, you could mine 100 coins a day using just your CPU. Unfortunately, today it’s impossible to mine Bitcoin with your CPU due to the ASICs. Check your RandomX CPU hash rates below. The CPU is the Central Processing Unit – essentially the brains of the computer. Our calculator considers the Intel and AMD made processors that are found in most laptops, desktops and servers. Currently Monero is listed since it's the most popular CPU mined coin. Top CPUs. Model / cores / frequency Hash rate Monthly revenue; AMD Ryzen 9 3900X 12-Core ... CPU mining involves either using everyday computers or setting up components to make use of their capacity solely as mining devices. Pool or Solo Mining? The consensus in 2020 is that solo mining would be outdated but for the earliest stages of new coins, or those where the hashrate is extremely low due to almost no interest. Even if a CPU is used, solo mining, where a computer competes for ... Despite the days of Bitcoin mining 50 BTC on a laptop being long gone many miners still seek out CPU mining. Most of this is due to its availability and claims as one of the most cost-efficient types of crypto mining hardware to obtain. Yet there are still active mineable cryptocurrencies for the lower-end computers to participate in CPU mining ... Hashrates.com is the leading reference site for checking GPU and CPU hash rates. You don’t have to be an expert – anyone interested in mining cryptocurrencies can use our Hash Rate calculator to get an accurate hash rate for a given algorithm with your hardware. The higher the hash rate you can attain on a given algorithm, the more profit you can make, but estimates vary widely. If you ...

[index] [40588] [40870] [35385] [42256] [19209] [15674] [23907] [48336] [42897] [7290]

BitcoinZ CPU and GPU mining

Mining BTC With: CPU AMD Ryzen Threadripper 1950X 3.4 GHz 16-Core 32 Threads & Dual Nvidia GEFORCE GTX 1080 Ti Fanpage facebook: https://www.facebook.com/Lit... 6GPU Mining rig Aluminum Stackable Mining RIG Case: https://amzn.to/2W0Yno2 Gigabyte Geforce GTX 1060 G1 Gaming Graphics Cards: https://amzn.to/2VVFWB0 Nvidia GEFORCE GTX 1070 Ti - FE Founder's ... SUBSCRIBE FOR MORE HOW MUCH - http://shorturl.at/arBHL Nviddia GTX 1080 Ti - https://amzn.to/2Hiw5xp 6X GPU Mining Rig Case - https://bitcoinmerch.com/produc... In this video I show you how to use Awesome Miner and Mining Pool Hub to mine crypto currency (ZClassic & Electroneum) with both a GPU and a CPU on the same ... how to mine BitcoinZ on a cpu and gpu ((( first 5 likes add a comment with you'r wallets receiving address will get 100 BitcoinZ for free ))) website: https:...

#